Append 0 front of incoming callerID

[TOPBAY]

Sorry for basic question, but how to add 0 in front of incoming caller id?
When you call out from call history it is easy to have 0 prefix added already.

[Env]
- ISDN (E1)

- Short code
0N
Dial
N

- ARS
N
Dial
.

- ICR
98765401 -> 401
98765402 -> 402
98765403 -> 403
98765404 -> 404

Best Regards

 

[tlpeter]

It is on the ISDN trunk and called prefix.
Put it in there and you will have a leading 0 in the call log.

BAZINGA!

I'm not insane, my mother had me tested!

 

[TOPBAY]

Actually I already have "0" on ISDN line prefix section. But no luck..

 

[intrigrant]

Add a zero to National and international prefix as well.

 

[TOPBAY]

Yes, if you see gif image on previous post, zero is in National and international prefix as well. But no luck..

 

[Ekster]

Prefix = blank
national = 0
internationl = 00

If prefix is set to "0" it will remove the leading zero from all calls that are using the national/international number format

+++ Divide By Cucumber Error. Please Reinstall Universe And Reboot +++

 

[Gunnaro]

Good call, Ekster!

And Topbay, if you have a range of DDI's, you only need 1 ICR.

98765401 -> 401
98765402 -> 402
98765403 -> 403
98765404 -> 404

This covers one thousand DDI's: 98765XXX -> #

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

 

[intrigrant]

Tried this?
Prefix = blank
national = 00
internationl = 000