Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Any way to add more external relays or 3rd patty relays for ip office?

Status
Not open for further replies.

RodneyMcSnow

Technical User
Jun 29, 2007
420
US
Customer has ip off give 500v2 on 5.0 and currently has 2-gates that are controlled using the Avaya contact relays to open the gate.
Customer wants to add 2-more gates and also be able to open them with the ip office.
Any suggestions or is this impossible?
 
If you have analog station ports, you can connect a Viking LDB-2. That will give you a contact closure output when it detects ringing on the line.

 
I have used the Viking C-2000B controller with the appropriate door phones. They can control 4 doors/gates with one trunk port on the IPO.
 
Thanks to all who contributed thoughts.
Nice to know there are options and will pass info to client.
 
Yopu can use a velleman Kit, so you have the pleasure to build it yourself :)

K8086

ACA IPTelephony
ACA IPOffice implement
ACS IPOffice implement
 
Never thought of Velleman!

Velleman Telephone Ring Detector with Relay output Module VM144 comes assembled and looks good for just over GBP15.
 
Have a look for SIP relay modules but they aren't cheap (and you will need VCM).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top