announcment

[raslin]

i need to record remotly an annoucment. any clue how to trick the system into allowing me to do this. current set of vdn - vec which has step route to *10 where *10 is fac for recording.

NB g3r v8 with ann boards not val boards

any help will be appreciated

 

[n25]

Have you tried TACing to the remote PABX and dialing the FAC from there?

 

[lever]

Set up remote-Access on your switch.

Dial the Etn number then the Access code you set for it, you'll hear dial tone, and your in.

Then just dial your Feature codes as normal to record the Announcement(s)

lever

 

[mikeydidit]

You can dial in through the remote access and do this. After you are in dial the announcement number and the codes, then do your recording.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[1a22ip]

Also try to set up a IP Softphone. Make sure that the COR/COS has the rights to record.

Just a thought
ED

1a2 to ip I seen it all

 

[raslin]

v8 does not have ip phones.

 

[SF0751]

We have a "weather hotline" for employees to call when they're not sure if the office will be open or not, and we use the method that mikeydidit suggests. Remember to change the individual announcement to "unprotected" (in the "cha ann" screen) so that it can be recorded over.

Susan
"Opportunity is missed by most people because it is dressed in overalls, and looks like work." - Thomas A. Edison

 

[raslin]

will try doing that thanks SF0751

 

[lopes1211]

R8.3 had softphones. R8.4 had hardphones. You may want to look into having Avaya or a BP give you a "dot" upgrade on your R8.

-CL