Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analogue won't work in Group Hunt List 1

Status
Not open for further replies.

Sherminator82

IS-IT--Management
Jan 27, 2010
13
GB
I am fairly new to the world of CS1000, so i would appreciate any help you can offer. I am attempting to place an analogue in a group hunt list, but it won't respond. I can ring the extension directly and it works. I can place two 1120 IP phones in the same Group Hunt and they work. But if i ring the PLDN 6405, the analogue won't ring. Here is a prt for the tnb - i would appreciate any info:

DES 500
TN 040 0 14 05
TYPE 500
CDEN 4D
CUST 0
ERL 00000
WRLS NO
DN 6091 0 MARP
AST NO
IAPG 0
HUNT 6405
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
LNRS 16
XLST
SCI 0
SCPW
SFLT NO
CAC_MFC 0
CLS CTD DTN FBD XFD WTA THFD FND HTA ONS
LPR XRA AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD UDI RCC HBTD IRGD DDGA NAMA MIND
NRWD NRCD NROD SPKD CRD PRSD MCRD
EXR0 SHL SMSD ABDD CFHD DNDY DNO3
CWND USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
FDSD NOVD CDMR MCDD T87D PKCH MPTD
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
DATE 8 JUN 2010
 
Apologies - here is a PRT of the GHT. Very basic as i have only set it for testing.

REQ: prt
TYPE: ght
LSNO 106
SIZE 10
RNGE

GHLN 0106
GHT

PLDN 6405
DNSZ 16
STOR 0 6091
STOR 1 5135
STOR 2
STOR 3
STOR 4
STOR 5
STOR 6
STOR 7
STOR 8
STOR 9

If you ring 6405, will always ring 5135, but never 6091.
Thanks
 
Apologies - its very basic GHT as only set for testing. When you ring 6405, will always call 5135 but never 6091.

REQ: prt
TYPE: ght
LSNO 106
SIZE 10
RNGE

GHLN 0106
GHT

PLDN 6405
DNSZ 16
STOR 0 6091
STOR 1 5135
STOR 2
STOR 3
STOR 4
STOR 5
STOR 6
STOR 7
STOR 8
STOR 9


Thanks
 
Looks like your pointing the Analogue/500 set to the HUNT DN OK being the PLDN, PilotDN defined, but you also need to include the Analogue DN 6091 within that GHT 'GroupHunt' chain as suggested by Buddy

LD 20
REQ PRT
TYPE GHT (return)

That'll print all the GHT's

LD 18
REQ CHG
TYPE GHT
LSNO (Number) Note,not the PLDN number


Cheers!!
 
Strange, OK take OUT the GHT and rebuild ?

Cheers!!
 
Correct, even if 5135 is busy, 6091 still doesn't ring. I have even tried adding just the DN 6091 to the list by itself and ringing the PLDN - if rings the callers end but not on 6091.

I have OUT'd the GHT and the Phone, still didn't work....
 
The plot thickens...Try using from STOR 1 xxxx upwards rather than '0' and see what happens ?

If your using LIN or RRB Hunting arrangement as defined in your PLDN they still should ring ?

Cheers!!
 
The plot thickens indeed!! Moved 6091 to STOR 1 in the GHT - still does not ring. This is how basic i have made it with still no difference.

I have only 6091 in STOR 1 of the GHT with PLDN 6405. I call 6091, it rings no problem. I call 6405, and nothing on 6091!! Even it rings for the call originator!! Stumped, completely!!

If i add 5135 to the GHT, in a RRB arrangement, ring 6405 - only 5135 rings. Hang up, ring again and still 5135 rings. Its as though 6091 doesn't exist at all to it...very much tearing my hair out!
 
Curious if 6091 rings when you just dial it directly. In other words, is there a Ring Generator present on that shelf?

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--
 
I'm sorry, you'll have to excuse my ignorance but Ring Generator??

I have just tried the GHT with two DCS sets i have - 5034 & 6968. When i rang 6405, 5034 rang fine, but 6968 doesn't...even when 5034 is busy. Here is there TNB's:

DES 096000
TN 096 0 00 27 PHANTOM
TYPE DCS
CDEN 8D
CUST 0
ERL 00000
WRLS YES
WTYP DECT
MWUN 32
DMC 12 0 10
INDX 1
VSIT NO
DN 5034 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
XLST
SCI 0
SCPW 1
SFLT NO
CAC_MFC 0
CLS TLD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD UDI RCC HBTD IRGD DDGA NAMA MIND
NRWD NRCD NROD SPKD CRD PRSD MCRD
EXR0 SHL SMSD ABDD CFHD DNDY DNO3
CWND USRD CNDD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
FDSD NOVD FEDA CDMR MCDD T87D PKCH MPTD
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
DATE 25 JUN 2007


TN 096 0 02 30 PHANTOM
TYPE DCS
CDEN 8D
CUST 0
ERL 00000
WRLS YES
WTYP DECT
MWUN 32
DMC 12 0 6
INDX 10
VSIT NO
DN 6968 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST
SCI 0
SCPW
SFLT NO
CAC_MFC 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD UDI RCC HBTD IRGD DDGA NAMA MIND
NRWD NRCD NROD SPKD CRD PRSD MCRD
EXR0 SHL SMSD ABDD CFHD DNDY DNO3
CWND USRD CNDD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
FDSD NOVD FEDA CDMR MCDD T87D PKCH MPTD
PLEV 02
AACS NO
MLWU_LANG 0
FTR CFW 4
DATE 12 MAY 2010


Don't know if that might help someone diagnose the problem...
 
Does 6091 ring at the desk when you just dial it directly.

--
GHTROUT.com - Help for Nortel Meridian/CS1000 System Administrators
--
 
have a look in LD 57.....

There are 2 parameters GHTA / GHTD

Group Hunt Terminate allow or deny.

It sounds like the GHTD has been set on the extension 6091
 
Can you advise your Sytem and Release and is it patched upto date ?

There is a bool in the 'Group Hunt' feature code which is used to keep track of the status of each of the DNs in the hunt group. This bool was not being cleared during this particular call scenario. Therefore, the DN was still tagged as 'busy' in the 'Group Hunt' feature code.

That'll be a patch required just my $ worth

Cheers!!
 
Thank you DFKSydney, that was most helpful.

I did a PRT ALL on LD 57, for FFC. Found the entry for GHTA and ran on the phone - worked perfectly. Thank you very much for all your help everyone
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top