Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analogue phone - Call Transfer

Status
Not open for further replies.

pbxtester

Technical User
Sep 13, 2007
27
DK
Hi,

I have some analogue phones and I am having trouble transfering a call from one phone to another. I have just checked the Class Of Service (CLS) and it has XFD - Call Transfer denied. In order to make this work, I need to set it so XFA, right?
 
Also a good idea to use LD 81 LST Feat XFD as a check. You may have more phones with XFD that you thought which the users haven't - yet - discovered. Saves future hassle.

regards


Beattiejr
 
If you want to used Transfer, conference and exchange feature from the analog set, give CLS TSA. It override CLS XFA but give the ability to used those 3 features regarding the codes entered in MPO block of LD 15.
CNFD for conference(give 3)
TGLD for toggle (give 2)
DISD for disconnect (give 1)

Then use
Flash + DN for transfer
Flash + 1 for revert and cut the current call
Flash + 2 for toggle calls
Flash + 3 for conference
 
Thank you so much.

I think I just add the XFA to the CLS for now. :)

I am right that when the XFD is applied to an analogue phone it isn't able to transfer the call? When the user tries to do it the meridian just transfer the call to the attendant and since I do not have an attendant it goes to the night number - in my case that is my Meridian Mail.

Does not that sound like a plausible call flow? And when I set the XFA this should stop.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top