Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analog phone numbering plan

Status
Not open for further replies.

TAnselm

Vendor
Mar 10, 2006
791
US
Im installing a MICS in a treatment facility with 2 Analog Station Modules. The Analog phones will be in patient rooms and they want the phone numbers on the phone to be 5XXX (5 and the room number.)

I do have a FastRAD and NRU.

How do I change the extension numbers for the analog phones on each port to what they want them to be? Knowing of course that even with all 12 ports in use 5XXX would not be in the system.

I know it's possible using NRU in the browser window. I just don't know where to go in NRU to accomplish this. (Been a long time since I worked with Norstar and NRU)
 
That's correct if I want to change them one at a time from a programming phone. (It would be under System Programming, since it's new software). But How do I do it from the NRU Browser?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top