analog lines with DID trunk

[TELECOMSONATRACH]

recently we have a problem with analog lines in our system AVAYA:
OUTGOING works great, but for incoming when calling on these lines mean occupation..
that can be multifrequency program is not correctly set!!!!
ency-signaling Page 1 of 4
MULTIFREQUENCY-SIGNALING-RELATED PARAMETERS[highlight #EF2929][/highlight]
Incoming Call Type: group-ii-mfc ANI Prefix:
Outgoing Call Type: group-ii-mfc Default ANI: 041982000
Maintenance Call Type: none NEXT ANI DIGIT
Incoming: send-ani
Outgoing: send-ani
Maximum Resend Requests:
Received Signal Gain (dB): 0
Transmitted Signal Gain (dB): -3
Request Incoming ANI (non-AAR/ARS)? y
Outgoing Forward Signal Present Timer (sec): 15
Outgoing Forward Signal Absent Timer (sec): 30
MF Signaling Intercept Treatment - Incoming? y Outgoing: tone
Collect All Digits Before Seizure? y

Private Group II Permissions and Public Interworking? n

Use COR for All Group II Responses? n
Group II Called Party Category: call-type
Use COR for Calling Party Category? n
MULTIFREQUENCY-SIGNALING-RELATED PARAMETERS

Request Call Category at Start of Call? n
Restart ANI from Caller Category? y
Number of Incoming ANI Digits: 0
Number of Outgoing ANI Digits: 0
Truncate Station Number in ANI: no
Address Digits Include End-of-digits Signal? n
Call Category for Vector ii-digits? n
Request CPN at Start of Call? n
Do Not Send Group B Signals to CO? n
ANI Source for Forwarded & Covered Calls: caller

INCOMING OUTGOING
ANI Available: 9 10
ANI Not Available:

MULTIFREQUENCY-SIGNALING-RELATED PARAMETERS

INCOMING FORWARD SIGNAL TYPES INCOMING BACKWARD SIGNAL TYPES
(Tones from CO) (Tones to CO)

Group-I Group-II Group-A Group-B
11: ignored 1: normal 1 : next-digit 2 : intercept
12: ani-not-avail 2: normal 3 : end-of-dial 3 : busy
13: ignored 3: maint-call 4 : congestion 4 : congestion
14: ignored 4: normal 5 : send-ani 6 : free
15: ignored 5: attendant : :
6: data-call : :
7: toll-auto : :
8: normal : :
9: data-verify : :
10: toll-operator : :
11: normal : :
12: normal : :
13: normal : :
14: normal : :
15: normal : :
ency-signaling Page 4 of 4
MULTIFREQUENCY-SIGNALING-RELATED PARAMETERS

OUTGOING FORWARD SIGNAL TYPES OUTGOING BACKWARD SIGNAL TYPES
(Tones to CO) (Tones from CO)

Group-I Group-II Group-A Group-B
12: end-of-digits 1 : normal 1: next-digit 1: congestion
: 5 : attendant 2: last-digit 2: congestion
: 6 : data-call 3: end-of-dial 3: busy
: : 4: congestion 4: congestion
: : 5: send-ani 5: intercept
: 6: setup-sppath 6: free
: 7: last-2-digits 7: intercept
: 8: last-3-digits 8: congestion
: 9: congestion 9: congestion
: 10: congestion 10: congestion
: 11: congestion 11: congestion
: 12: congestion 12: congestion
: 13: congestion 13: congestion
: 14: congestion 14: congestion
: 15: congestion 15: congestion


please help us...

 

[amriddle01]

As in the other thread.......Wrong forum, this is for Avaya IP Office, not sure what that you have...but it isn't an IP Office


Avaya Implementation Qualified Professional Specialist Technical Engineer (AIQPSTE)