I am able to build a 500 on the TN but I receive no dial tone. But the card in the shelf still shows a Red Alarm, as if the card is disabled or not equipped. Thanks for any help!
I'd have to run back real quick I don't know if it's 3 times but it does flash. I am able to stat the card and shows that the first TN is built and idle. It's an 81c.
Yes that's right. I just don't get how I'm not getting it to work...I will say there was a digital card not being used on that slot so I installed a analog card because we need more analogs. I outted the digital card in ld 20 but didn't build a new card just built a phone on that card and it took. Is there something else I'm missing?
I agree, kinda strange. My first guess would be a faulty card. If the card is not faulty then I believe you may have to disable and force download the controller.
Yes it is and yes I have no luck but I haven't done enls yet...ill try that...yeah still a red alarm and to answer the previous question...it does blink 3 times
I've seen this problem before when a card slot was programmed as a digital and then replaced with an analog. It's like something is stuck in the working database in memory. When I have seen it the problem cleared up only after a sysload was performed.
Do you have any other available slots to try the card in?
Here's a thought. Remove the 500 set programming from that card. Then do an OUT CARDMLT followed by L S C. Then do a new CARDSLT followed by L S C and then program the 500 set back and see if it works.
Sorry for the delay in posting...got busy building other phones until I could come back to the problem. So I had did everything y'all pretty much said..outting the analog putting the digital back then outting the digital and installing a analog card again...until I found a series that worked. I didn't. So I just grabbed another new analog card installed that one still didn't take...packed up the new analog card I had just grabbed...put back the previous new analog card back in the slot...built a phone and it worked...sometimes I hate machines haha but it's working now
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.