Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aloha Super user EDC issue version 5.3
- Thread starter Jnan
- Start date
TowerActual
Technical User
Yes, you should be able to cut/delete the Iberexe.dll from the BIN folder on the Aloha Manager BOH machine and allocate the super user for total access to both AM and EDC. You might need to Stop/Start the services or just reboot the Aloha BOH but it should work.
Shoot from the hip.
-TA
Shoot from the hip.
-TA
- Thread starter
- #3
- Thread starter
- #5
- Thread starter
- #7
TowerActual
Technical User
Jnan,
I think your question is being interpreted that you are trying to access your Aloha EDC through the "super user" key sequence that dealers have used historically to have complete access to the system and allow for things like changing processor information.
If you are logging into EDC and Stopping POS Processing and you do not have the access allowing you to alter, add or delete processor information then whatever login/pw you're using does not have access to those functions and you need to try to use the "Super User" login to make those changes.
Shoot from the hip
-TA
I think your question is being interpreted that you are trying to access your Aloha EDC through the "super user" key sequence that dealers have used historically to have complete access to the system and allow for things like changing processor information.
If you are logging into EDC and Stopping POS Processing and you do not have the access allowing you to alter, add or delete processor information then whatever login/pw you're using does not have access to those functions and you need to try to use the "Super User" login to make those changes.
Shoot from the hip
-TA
- Thread starter
- #9
- Status
Similar threads