Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Aloha Fileserver Recovery

Status
Not open for further replies.

flyer777

Technical User
Feb 22, 2011
10
US
Hi All

I work for an establishment that is running Aloha 6.2.30.
It is in the redundant mode, I was able to get it out of redundant for a short period, however it turned out that we had a bad network switch that interrupted the connection with the server and I had to
put it back into the redundant mode. All hardware issues were resolved, now I can't get the system out of the redundant mode using the fileserver recovery utility.
Any help would appreciated.

Thanks in advance.
 
Check out my FAQ on the FAQ tab located above. - Lanacfg and file server recovery.


Cheers,
Coorsman
 
Thanks coorsman.

I did everything as per your post and it checks out.
I still could get the fileserver recovery to work.
In addition I made the mistake of telling the manager to use the "new data".
How do I restore the command sequence back to the "Data" folder.
 
Ok.
I changed the name of the "Data" file to Newdata and removed the recent newdata file and that worked.
The issue now is that when I start the Manager program I get an error message that the CTLSvr has been disconnected (trying to start it in services does not work) and a EDC error that it is not registered.
HELP!!!!
 
do you want to do a goto meeting with me? I will dial into your computer I can fix it.

Cheers,
Coorsman
 
you have to have a newdata folder - copy the data folder to newdata and delete the trans.log file.


Cheers,
Coorsman
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top