swilson998
IS-IT--Management
My organization has been using AlarmTraq ( to monitor all of our S8700, G3r, Audix and CMS sites for the past 2 years with no problems. Last week our system administrator left the company and I am now in charge of all the admin stuff.
Does anyone have any experience with AlarmTraq regarding setting up the maintenance object database to issue test commands to our sites when we receive an alarm.
If we receive an R-MEDIA minor alarm on a G3r the system is set to send the following commands:
busyout host-adapter
reset host-adapter
test host-adapter
release host-adapter
Although this seems to work most of the time and we receive an ALL ALARMS RESOLVED message after about 10 minutes the same alarms comes up again every evening about 10:00 PM and the process starts all over again. Any suggestions would be appreciated,
Does anyone have any experience with AlarmTraq regarding setting up the maintenance object database to issue test commands to our sites when we receive an alarm.
If we receive an R-MEDIA minor alarm on a G3r the system is set to send the following commands:
busyout host-adapter
reset host-adapter
test host-adapter
release host-adapter
Although this seems to work most of the time and we receive an ALL ALARMS RESOLVED message after about 10 minutes the same alarms comes up again every evening about 10:00 PM and the process starts all over again. Any suggestions would be appreciated,