Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Additional PRI's

Status
Not open for further replies.

MartyMar74

Technical User
Oct 5, 2005
31
US
How can I check to see if I can provision anymore PRI's on my switch? I have a CS1000MG Succession 3.0. My hardware supports up to loop to 52. I already have 8 Pri's provisioned. They reside on loops 2,3,18,19,34,35,56,57. I am in need to add 3 additional PRI's. I have PRI cards but not sure if I have enough loops to support. Please Advise! Thanks In Advance!
 
How many network groups do you have? It appears you have at least 2. The other thing you need to consider is MSDL cards for additional D-channels. Network group 0 handles loops 0 to 31 and network group 1 will handle loops 32 to 63. You need to see what vacant slots you have in card slots 0 to 7 in each network shelf. Keeping in mind that a superloop takes all 4 segments. So a T-1 card only uses 2 segments. So if you have a superloop 4 then slots 2 and 3 are used but the card only occupies 1 slot. You can out an MSDL card next to it but not a T-1 card.
 
KCFLHRC

Thanks for your response. I have 2 network groups 0 and 1. I will check what is in slots 0-7. I am hoping I can at least get one Dual PRI card in. I will post what I find. Thanks again for your response.
 
My CEQU is as follows:

CEQU
MPED 8D
TERM
REMO
TERD
REMD
TERQ
REMQ
SUPL 012 028 036 040
052 N100
SUPC
SUPF
XCT 000 016 032 048
TDS * 000 * 016 * 032 * 048
CONF * 001 * 017 * 033 * 049
MFSD * 000 * 016 * 032 * 048

DLOP NUM DCH FRM TMDI LCMT YALM TRSH
TRK 019 24 D4 NO AMI DG2 00
PRI 002 24 ESF NO B8S FDL 00
003 24 ESF NO B8S FDL 00
018 24 ESF NO B8S FDL 00
034 24 ESF NO B8S FDL 00
035 24 ESF NO B8S FDL 00
056 23 ESF NO B8S FDL 00
057 23 ESF NO B8S FDL 00
MISP 050
EXT0 3PE
CNI 009 000 000
CNI 009 001 001
EXT1 3PE
CNI 009 000 000
CNI 009 001 001
MCFN 256 MB

I will try find the location of MSDL Cards.
 
Ok, so printed a ADAN which I believe shows my MSDL. Please see the following:

ADAN DCH 0
CTYP MSDL
GRP 0
DNUM 14
PORT 1
DES LP002DCH00
USR PRI
DCHL 2
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
RCAP COLP NDS
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO
ADAN DCH 1
CTYP MSDL
GRP 0
DNUM 14
PORT 2
DES LP003DCH01
USR PRI
DCHL 3
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC S100
SIDE USR
CNEG 1
RLS ID **
RCAP ND2 MWI
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7
ADAN DCH 2
CTYP MSDL
GRP 0
DNUM 14
PORT 3
DES LP018DCH02
USR PRI
DCHL 18
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
RCAP COLP NDS
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO
ADAN DCH 4
CTYP MSDL
GRP 1
DNUM 15
PORT 2
DES LP034DCH04
USR PRI
DCHL 34
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
RCAP COLP NDS
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO
ADAN DCH 5
CTYP MSDL
GRP 1
DNUM 15
PORT 3
DES LP035DCH05
USR PRI
DCHL 35
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC NI2
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
RCAP COLP NDS
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
BSRV NO
ADAN DCH 6
CTYP MSDL
GRP 1
DNUM 10
PORT 0
DES LP056DCH06
USR PRI
DCHL 56
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC S100
SIDE USR
CNEG 1
RLS ID **
RCAP ND2 MWI
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7
ADAN DCH 7
CTYP MSDL
GRP 1
DNUM 10
PORT 1
DES LP057DCH07
USR PRI
DCHL 57
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC S100
SIDE USR
CNEG 1
RLS ID **
RCAP ND2 MWI
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7

From what I can tell, just as you suggested, 8/9 and 24/25 are open. I believe I have seen a walk through here somewhere that provides step by step instructions to provision. Big Thanks to everyone for providing input!!!
 
Unfortunately that only tells you what network group they are in. You need to physically look and see what slots are available in each network group and shelf.
 
A visual inspections shows that the MSDL cards are located at:

Network group 0 - 0 slot 7

Network group 1 - 1 slot 8
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top