Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding server running 2008 to 2003 domain (adprep steps already taken)

Status
Not open for further replies.

fenderjbass

IS-IT--Management
Jun 4, 2011
18
US
Hello all,
I currently have a 2003 domain. We purchased a new server, and installed 2008 Enterprise 64bit. On the 2003 server I ran adprep.exe /forestprep, no issues with that, and /domainprep, also no issues. But when I run dcpromo on the 2008 server I get a message saying I need to run /forestprep on the 2003 server before I can add the 2008 as a DC. Like I said I had no issues up to this point. I've installed 2008 at sites. But this is the first time I've added a 2008 server to a 2003 domain. I was wondering if it is a compatibly issue with 32bit server 2003 and 64bit server 2008? I've googled this. The only answers I've found were for people who did not run adprep.exe /forestprep and /domainprep.
 
I did wait for replication. I tried it a few days later with same results. I did manage to find my mistake. I back tracked the steps I did, and thought maybe I didn't use the correct version to run adprep. I couldn't remember if i had downloaded 2008 or 2008 R2. This made the difference. The disk I used to install Ent Server R2 did not have adprep in the sources directory. So I started from the beginning, but this time making sure i downloaded the 2008 R2 edition. It was 64 bit, but did have the adprep32.exe file. I ran adprep32 /forestprep and /domainprep. Ran dcpromo on the 2008 server, and it worked! So using the R2 disk is what made the difference.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top