Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding Digital Card

Status
Not open for further replies.

it44

IS-IT--Management
Jan 25, 2006
56
US
Hi all. I am getting ready to add a digital card to our option 11c. Will that automatically change the numbers below to 96 and 26 left since the card will add 16 ports?

And is there any additional steps other than just sliding the new card in. They aleady have the line going to the pacth panel from the blank slot.

Code:
>ld 22
PT2000

REQ  slt
ANALOGUE TELEPHONES     24    LEFT     8    USED    16
CLASS TELEPHONES         0    LEFT     0    USED     0
DIGITAL TELEPHONES      80    LEFT     10    USED    70

Thanks
 
You may receive a Keycode from Nortel. It have to be entered in PBX.
 
Those counts are how many keycodes you have left in software, a card is hardware.


ANALOGUE TELEPHONES Total 24 LEFT 8 USED 16
CLASS TELEPHONES Total 0 LEFT 0 USED 0
DIGITAL TELEPHONES Total 80 LEFT 10 USED 70

You only have 10 digital and 8 Analog software Lic left. You will need to buy more TN Lic to use more then 10 Diagital TN's.
 
both post are right, a new card does not add license or tn's. that's a key code option ($) to add a card, slide it in, it needs to blink 3 times and give you an ovl. then go to ld 11
new
cardmlt
the the 1st digit of the tn

john poole
bellsouth business
columbia,sc
 
I just received the card and inserted it. It blinked red 3 times and prompted the message of xmi001 9 xdlc

went to ld 11 and tried to new cardmlt and received:

SCH0122
 
Don't have to do new cardmlt
Just
REQ: new or cpy 1
TYPE: 3904 (or any other Nortel digital set)
TN 9 0 for the first TN of card in slot 9
 
You dont need TN lic anymore. You will have buy digital or analog lic to go beyond the 24 analog and 80 digital lic.

You can program 10 more digital and 8 more analog phones before you need to buy the lic.
 
thanks all. I was wondering because when i added the card is still showed only 10 digital left. Very displeased.

Do i buy the license for the additional card(or additional digital licenses) from my pri carrier?
 
After adding the card, this is what I have. Digital never changed. it appears i have plenty TN's. I only see 3 keycodes and I have 7 cards installed

Code:
REQ  slt
ANALOGUE TELEPHONES     24    LEFT     8    USED    16
CLASS TELEPHONES         0    LEFT     0    USED     0
DIGITAL TELEPHONES      80    LEFT     9    USED    71
DECT USERS                0    LEFT     0    USED     0
IP USERS                 0    LEFT     0    USED     0
BASIC IP USERS           0    LEFT     0    USED     0
DECT VISITOR USERS        0    LEFT     0    USED     0
ACD AGENTS              10    LEFT    10    USED     0

PCA                      0    LEFT     0    USED     0
ITG ISDN TRUNKS          0    LEFT     0    USED     0
H.323 ACCESS PORTS       0    LEFT     0    USED     0
AST                      1    LEFT     1    USED     0
RAN CON                  0    LEFT     0    USED     0
MUS CON                  0    LEFT     0    USED     0
SURVIVABILITY            0    LEFT     0    USED     0

TNS                   2500    LEFT  2376    USED   124
ACDN                   300    LEFT   246    USED    54
AML                     16    LEFT    15    USED     1
IDLE_SET_DISPLAY NORTEL
LTID                     0    LEFT     0    USED     0
RAN RTE                500    LEFT   500    USED     0
ATTENDANT CONSOLES    2500    LEFT  2500    USED     0
BRI DSL                150    LEFT   150    USED     0
MPH DSL                  0    LEFT     0    USED     0
DATA PORTS            2500    LEFT  2500    USED     0
PHANTOM PORTS         2500    LEFT  2500    USED     0
SIP ACCESS PORTS         0    LEFT     0    USED     0
TRADITIONAL TRUNKS    2500    LEFT  2476    USED    24
DCH                     80    LEFT    79    USED     1
TMDI D-CHANNELS         64    LEFT    64    USED     0
KEY1 62470640
KEY2 01754015
KEY3 50542656
 
can someone delete my previous post asap please.
 
it appears that you do not need a license per card, but you need a license to extend the limits of the system, correct?
 
You need Lic per TN.

Cards are hardware, you buy the card

TN's are software, you buy Keycode's to program the Hardware.

If you had 10 Dig cards, you don't need any Lic until you want to program a phone. then you need a Lic.you have 8 Dig Lic left, after you program those 8 you will need to buy more Lic to program any more phone's.
 
ok here is the quote I just received from my provider.

$1400 plus install for 16 licenses. Is that correct, since I am adding 16 more phones? The 8 left will be occupied as well. The price seems enormous.

Is there a way for me to kill the install fee by doing it myself?
 
You can shop other vendors for keycodes as well, that sounds a little high for only 16 tn's.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top