Adding Additional DID's

[abntelecom]

We're adding additional DID's to our existing PRI. The DID's have different prefix than what we have working right now. I'm not sure if I have to do any programming in the PBX. Or just start assigning the new did's to the sets.

Thanks in advance.

 

[Boberator]

If you're only sending your main number as caller id, you don't have to do anything. If you want to send the DID number as caller id, you will have to set up a new CLID table with the new prefix.

Una salus victus nullam sperare salutem. --Vergil

 

[johnpoole]

unless your sending the did number out when you call, just add the dn's to the set.. if you have a clid entry that has didn yes, then build a new one that has the new nxx

john poole
bellsouth business
columbia,sc