Good Morning all, I am trying to add a fifth trunk to a v. 2 616 at a doctors office that only has 7408 phones. I have added the fourth co no problem, but when I go to add the 5th one on the fifth button down, it is the Heading button in programming and I can't seem to figure it out. Any help would be Greatly appreciated. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
adding a 5th line to a 616 with 7408 phones 1
- Thread starter mmmheyhey
- Start date
- Thread starter
- #3
- Thread starter
- #5
- Thread starter
- #7
Hi Marv, Yes I have already programmed line 4 onto the phones, but because they are 7208's while in programming the button that I want to use for line 5 is the heading button. My question is since I don't have soft keys on the 7208, which button do I use for Add/Remove while in programming. Thanks.
-
1
- #8
Go to our website and click on Reference guides. I have an overlay for the 7208 posted there.
Brian Cox
Brian Cox
- Thread starter
- #9
Hi exsmogger, GREAT website! I will be book marking it. On the 7208 phones how would I be able to use ADD in programming? I know how to program with the 7310's, but this office has all 7208. I'm sure it is simple, but I am overlooking something. Thanks.
- Thread starter
- #10
- Thread starter
- #11
Exsmogger--Thank you for solving my problem--took but a couple of minutes with that template. The one with their manual wasn't as complete as yours, go figure! I really appreciate your quick reply--and everyone else's too. Have a great weekend guys.....
- Status
Similar threads
- Locked
- Question
- Locked
- Question
