Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Add / Print City Codes - Residential Prefixes 1

Status
Not open for further replies.

AlphaG33k

Technical User
Apr 24, 2007
28
0
0
US
West Virginia just resently added a new area code and went to ten digit dialing. I need to make sure that our local trunks are only allowed to dial out to local city codes. How do I print out what city codes are available after dialing 9 to get out? If any are missing how would I go about adding a new one? Thanks in advance for the help.

IT1
 
Thanks for the reply, for those who have this same problem you can look at page 997 of the Software I/O Administration NTP. Its under load 90.

>LD 90
REQ PRT
CUST
FEAT NET
TRAN AC1
TYPE NXX

Thanks again GHTROUT for the fast reply.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top