Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACOD - ACCESS CODE "x6XXX"

Status
Not open for further replies.

freitaslc

Technical User
Aug 12, 2014
8
US
The CS1K here is programmed to call the branches through four digits already, and I'd like to add another one w/ x6XXX (6 is free). So how should I proceed?
 
It depends on if you are using a ACOD or a Steering code. I would have thought that you might be using the latter as either a CDP or UDP steering code.

Download the tool at
Instructions are provided. Once you have the Networking list, then you will be able to program in the new number.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
I use ACOD to make call to the Posts, Btw I've set up Nars/Bars as well, but to make overseas calls via Vonage and NetBox to the state department.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top