Access MAS server-manager over VPN connection

[chad652]

I have a MAS server (Teleworker) that I would like to be able to administer remotely. I have a linksys vpn connection to the site. I can access the ICP and other server's through the vpn but when I enter the MAS server's address as I would on site, I get the security alert about the certificate as I always do but then I get an error 403(Forbidden) You are not authorized to view this page. If I access it while on site, everything works fine. Any ideas?

Thanks

 

[tlpeter]

You need to setup a pptp connection to the teleworker
Make a new user and set vpn to yes
You do not need a vpn router to access it all
The teleworker has it's own external ipaddress and if setup right you can access the teleworker and icp with it

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Implement IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[chad652]

Thanks. I was able to play with this earlier today and access the MAS server. Only one problem. The former network admin set up vpn connections for the staff and myself on another server that I do not have access to. There was a port forwarding rule for tcp port 1723 to his server. As far as I know the old vpns do not work. But that's another story. I'll see what I can do. Thanks so much for the input.

Chad

 

[cknipe]

On my network, our VPN users come in and are given an IP address of a seperate subnet. If this is the case on your network, be sure and go to Local Networks on the MAS and add it there.