Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

96xx and LLDP

Status
Not open for further replies.

telcomwork

Technical User
Mar 2, 2002
1,625
US
Have phone trying to register on the network and sitting at LLDP on the screen. Anyone else have this problem. Did you reconfigure your switch, my router person doesn't have LLDP enabled and even more says he's a few revs behind even for this protocol.

Do I have some questionable firmware?

I have 1600, 4600 and 9600 all in teh same directory


 
I had 1.5 and I'm going to try 1.1. I'll post up on how it goes.
 
I have the same issue. Have a new s8300, CM4.0.1, with 9620 IP sets. We're getting the same waiting for LLDP message on our sets. Our network folks have cleared the ARP tables, and made some other changes but to no avail.

We confirmed the IP addressing, DCHP scope and subnet were correct. Trying to narrow it down to http server issue or if cisco switch is at fault.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top