Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

824 DR5 curtesy phone.

Status
Not open for further replies.

Kkress4

Technical User
Sep 12, 2007
43
US
Is their any way to program a ATA phone to when you pick it up it calls a internal DN? no dialing or anything you just pick it up and it calls another DN? thanks
 
8X24.....trying to remember....I think you can do a hotdial setup, maybe not, look for "hotdial" parameters on the TAT DN and program it to dial another internal DN. Maybe someone else here will remember more clearly whether it's possible on an 824, but I think it is
 
From the 8x24 manual
Direct-Dial telephones
A telephone can be assigned to call a Direct-Dial telephone when
you dial a single digit. Use the CHRNQE display button to select
the setting: Setl, Set2, Set3, Set4, Set5 and None. .
Programming hints
Each telephone can call only one Direct-Dial telephone, although
up to five Direct-Dial telephones can be designated in the
Direct-Dial section of Administration programming. Any number
of telephones can be assigned to call a particular Direct-Dial
telephone.
The digit you dial in order to get the Direct-Dial telephone to ring
can be programmed by your Customer Service representative.

 
Hotline as pts mentions...Capabilities/ShowtheATA'sDN/SetAbilities/Hotline

Show and make Internal and enter the DN it should call..



 
Direct Dial will still require a button push, Hotline will start ringing when you go off hook.
 
alright got it all set up thanks for all your help!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top