800 GL-ID

[tekphone]

I have four 800 GL-ID cards in my switch. I wanted to know if I can just connect this with regular anolog line and use them as CO line?

 

[merlinman]

These will accomodate Loop Start or Ground start lines.

Go for it!

 

[aussie88]

Ans not only that, caller ID will work on those lines too, since it is an ID card.

 

[tekphone]

What i am tring to do is set two faxes machines that I have on POT lines to work together. Right now there is one out going and one incoming. Well the incoming is recieving to many faxes so I want to them up when one is busy the job will go the other. But I still want to keep the original incoming fax number

 

[merlinman]

What are the PHONE NUMBERS that are routed to the FAX MACHINE?

(w/o area codes!)

 

[Pepperz]

To keep the original number, you will have to set up hunting on them from Telco.

Pepperz@charter.net

 

[tekphone]

the numbers are 348-8915 and 348-8916

 

[aussie88]

PepperZ is right, you will need to get line hunting set up from the telco. Have both of the lines placed in the hunt group.