I have a 7912 phone that gives me an "error pass limit" message when i pick up the handset or dial an extension. Can't do anything else. I've tried resetting the phone and the configurations as well and still no go. Any suggestions?
Have you checked that the mac adress is correct, sounds like the phonset was autoregistered then unpatched for some time. Do you have auto registered turned on at present, Check that the directory number still exists.
Problem solved, the device profile was delete by one of my techs so the phone that was associated with it didn't know what to do so there for it didn't recreate an "auto" extension, kind of like when you first plug it in and it gives an extension of "85XXX". So I searched through the whole CAll Manager for the ip address and created another one. Problem solved. Thanks for chiming in though guys, this community helps me sometimes.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.