5601 ip phones

[ducatisenna]

Hi,

i have ip phones 5601s ,
i want to know exactly how can i configure these things,
for example a flashing means downloading dhcp server ,

what about a and b flashing together, what about messages and top not flashing only red ligth,
what about flashing fastly, downloading tftp? but i can not see anything on the tftp, at the beginning downloading all things from the tftp but later download nothing from the tftp
how can i configure these , i send these a regional office , so i want to configure these working another place,
place show me the way about these ip phones

i do not understand these phones and can not find any step by step configuration guide, please help me about this subject.

serhan from cablenet.

 

[tlpeter]

here is how to set the 5601 up:


3a. DHCP Address Installation
• Having connected the phone (see 2. Phone Connection), DHCP and timer are displayed.
• On 4601 and 5601 phones, initially all lamps will be on as the phone initializes. All lamps
on (with the button a lamp flashing) indicates attempting DHCP.
• After a few seconds, DHCP negotiation should be completed. If the timer reaches more than 60
seconds, it could indicate an error in either the network or DHCP operation.
• The phone requests the 46xxupgrade.scr file from the TFTP server (Manager). This should be
visible in the Manager's TFTP Log and on the phone's display.
• On 4601 and 5601 phones, all lamps will be on with both the button a and button b lamps
flashing whilst TFTP is attempted and occurring.
• The phone now requests additional files according to the instructions it found in the
46xxupgrade.scr file. The phone will go through a cycle of requesting files, loading files and then
transferring the files into its flash memory.
• Following file loading, the phone displays Ext. =. See 4. Phone Registration.

4. Phone Registration
The following will also occur following any power loss to the phone:
1. Following file loading, Ext. = is displayed. Enter the extension number you want applied to the
phone and press #.
• On 4601 and 5601 phones, this stage is indicated by the lamp at the top of the phone and
on the MESSAGES button flashing 0.5 seconds on/off.
• If not using auto-create extension, the extension number selected must be a preconfigured
VoIP extension. See Manually Creating Extensions.
• If the phone has been previously installed and has not been reset, it will display the
extension number that it last used.
• Wrong Set Type is displayed if you try to use the extension number of an existing non-IP
extension.
2. The phone displays Password =.
• If using auto-create extension for a new extension, just enter any number and press #.
Any digits entered for a password here are not validated or stored.
• If not using auto-create extension for a new extension, enter the user's Login Code set in
the IP Office Manager.
• During subsequent phone restarts, even though the password is requested, it will only be
validated if the phone's extension number is changed.
On display phones, the phone displays the time, date and then its extension number.
3. Test that you can make and receive calls at the extension.

______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[kwing112000]

You either need to have the IPO be the DHCP server or set up option 176 in your DHCP server to give the phones the correct call server and TFTP srever.

 

[ducatisenna]

thanks to of them working, other no don't, i do not know exactly how can i set extension, when top and messages field flashing i set the ext no and # , and i don't know , what sould i do after this point.

 

[kwing112000]

Usually when you set up a new IP station it is extension number # then password #