I recently moved about 55 IP phones and 2 5500 attendant consoles connected to a 3300 cx server. I changed all of the ip addresses and made the 5500 ip's static. When I run the configuration wizard, it appears to connect to the 3300 as well as the console hardware the problem is that at the very end of the configuration wizard the software finds two phone servers ( the old ip address and the new one). All of the ip phones work flawlessly, but the consoles won't connect. There must be some place in the 3300 that I am missing a setting. I can connect to the 3300 and DHCP is enabled and giving the new addresses correctly. Does anyone have any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
5500 attendant console problems w/3300 cx in new network
- Thread starter SmurfTurf
- Start date
- Thread starter
- #2
I should also mention that the security certificate that you see when you go into the web configuration has the old internal ip address as well as the new internal ip address as well as the external ip address. This is also a single box installation. Thanks in advance for any advice anyone may offer.
- Thread starter
- #3
- Status
