Reinstalled a 509 and can not get the ext. 12 to come up. Plugged in the set display back light lights then turns on and off. No display. Checked the block. I get dial tone and 48 volts. I tried to reboot and restore, power up and down. Could the port be bad maybe it was shorted out during reinstall?
I have not tried a complete initialization yet. Rest of the system is ok. Only using 4 Partner sets on this small system with 5 lines.
Anyone have this happen before?
I have not tried a complete initialization yet. Rest of the system is ok. Only using 4 Partner sets on this small system with 5 lines.
Anyone have this happen before?