4610's previously used with Definity not showing date/time on screen

[cjt20one]

Minor issue (not according to the client of course) but I have a bunch of 4610's that were used with a Definity that are now being used with an IPO 500.

The date and time showed on the top bar of the screen when the phones were connected to the Definity but when connected to the IPO the only show the extension number and user name. The client wants the date/time back.

Is this something I can edit in the text settings file or just a limitation of the hardware?

Thanks!

 

[tlpeter]

The 46 and 5600 phones are the only phones that do NOT show sate and time on the screen.
So this is normal behavior.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[amriddle01]

Try adding a Time of Day button to the handsets, it will stay on the handset once pressed until the next system reboot

ACSS (SME)
APSS (SME)

http://www.ipoffice.tel

"I'm just off to Hartlepool to buy some exploding trousers