Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

4610 freeze

Status
Not open for further replies.

MiguelBain

Technical User
Aug 25, 2009
12
PH
thread690-1287104

same problem here. i was able to make ping test from board to phone ip-address in ASA. also able to ping the phone. happening randomly everyday.. really affecting the operation of my call center.

thanks for the help in advance.
 
Hi

I think you need to check your POE. If too many IP phones are plugged into a data switch and the power is over subscribed, the ethernet port on the data switch will be blocked automatically. In this case the IP phones will still look functional from a display point of view but if you try to initiate a call you will not even receive dial tone.
Check the power usage per phone and check the POE power delivery of the data switch.
On a Cisco switch you can lock the power down per port eliminating these issues. We usually lock them down at 7Watt per port which covers the 4621 and 4610 phones
 
i am using individual avaya power adaptor for my ip phones, no POEs.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top