4602 SW IP Phone problem 1

[MD355]

Hello !

I am managing a PBX an Avaya G3siV12 with operating system R012i.00.1.221.1
which has enable 20 devices IP phones Avaya 4602 IP.

One of them had to be replaced and I found an Avaya 4602SW IP.

I tried to install it and used the exact same settings as the old phone :

Phone=192.168.2.212 (IP address of phone)
CallSV=192.168.2.80 (η IP address of media server)
CallSvPort=1719
Router=192.168.2.1
Mask=255.255.255.0
FileSv=192.168.2.88 (one PC running TFTP server that I setup)
802.1Q=on

I tried to activate the phone but it was looking for TFTP server.

So I setup one on a PC and uploaded an old file I had : 46XXUPGRADE.SCR

As soon as the phone connects to the TFTP and gets the file 46XXUPGRADE.SCR it asks for a file which is not available 4602dbte1_8.bin

Is this file necessary ?

Can anyone send it to me ?

Thanks !!

Makis


Below is the 46XXUPGRADE.SCR file :

##################################################
# Mon Sept 08, 2003
#
# 46XX Software Upgrade Script
#
# Release 1.8 Build 1804
# Set Types: 4602,4602SW
#
# Release 1.8.1 Build 1.803
# Set Types: 4606, 4612/4624, 4620
#
#################################################
# BOOTAPP VERSION NUMBERS
# 4602: 1.8
# 46xx: 83
# 4620: 1817
#################################################
#################################################
# BIGAPP VERSION NUMBERS
# 4602: 1.8
# 46xx: 1.8.1
# 4620: 1.8.1
#################################################


#check bootApp version

IF $MODEL4 SEQ 4602 goto BOOTAPP4602
IF $MODEL4 SEQ 4606 goto BOOTAPP46XX
IF $MODEL4 SEQ 4612 goto BOOTAPP46XX
IF $MODEL4 SEQ 4620 goto BOOTAPP4620
IF $MODEL4 SEQ 4624 goto BOOTAPP46XX
goto END

# BOOTAPP4602
IF $MODEL SEQ 4602D01A goto BOOTAPP4602D
IF $MODEL SEQ 4602D02A goto BOOTAPP4602SW
IF $MODEL4 SEQ 4602 goto BOOTAPP4602D
goto END

# BOOTAPP4602D
IF $BOOTNAME SEQ 4602dbte1_8.bin goto DEF46XX
SET APPNAME 4602dbte1_8.bin
goto END

# BOOTAPP4602SW
IF $BOOTNAME SEQ 4602sbte1_8.bin goto DEF46XX
SET APPNAME 4602sbte1_8.bin
goto END

# BOOTAPP4620
IF $MODEL SEQ 4620D01A goto BOOTAPP4620A
goto END

# BOOTAPP4620A
IF $BOOTNAME SEQ 4620COMMON.V1817 goto DEF46XX
SET APPNAME bbla20_1817.bin
goto END

# BOOTAPP46XX
IF $BOOTNAME SEQ 46XXCOMMON.V36 goto DEF46XX
IF $BOOTNAME SEQ 46XXCOMMON.V52 goto DEF46XX
IF $BOOTNAME SEQ 46XXCOMMON.V65 goto DEF46XX
IF $BOOTNAME SEQ 46XXCOMMON.V69 goto DEF46XX
IF $BOOTNAME SEQ 46XXCOMMON.V82 goto DEF46XX
IF $BOOTNAME SEQ 46XXCOMMON.V83 goto DEF46XX
SET APPNAME bbla0_83.bin
goto END

################################
#download definity bigApp #
################################
# DEF46xx
IF $MODEL4 SEQ 4602 goto DEF4602
IF $MODEL4 SEQ 4606 goto DEF4606
IF $MODEL4 SEQ 4612 goto DEF4624
IF $MODEL4 SEQ 4620 goto DEF4620
IF $MODEL4 SEQ 4624 goto DEF4624
goto END

#definity bigApp for 4602 model
# DEF4602
IF $MODEL SEQ 4602D01A goto DEF4602D
IF $MODEL SEQ 4602D02A goto DEF4602SW
goto END

#definity bigApp for 4602D model
# DEF4602D
SET APPNAME 4602dape1_8.bin
goto END

#definity bigApp for 4602SW model
# DEF4602SW
SET APPNAME 4602sape1_8.bin
goto END

#definity bigApp for 4606 model
# DEF4606
SET APPNAME def06r1_8_1.bin
goto END

#definity bigApp for 4620 model
# DEF4620
IF $MODEL SEQ 4620D01A goto DEFAPP4620A
goto END

# DEFAPP4620A
SET APPNAME def20r1_8_1.bin
goto END

#definity bigApp for 4612 & 4624 model
# DEF4624
SET APPNAME def24r1_8_1.bin
goto END

# END
#GET 46xxsettings.txt
#GET 46xxsettings.scr

 

[hibroth]

46xx series is end of support at least since 2010, anyway this ia a IP Office forum, for aura/cm you should ask here:

https://www.tek-tips.com/threadminder.cfm?pid=690

 

[Shaun E]

Here you go.

 

[MD355]

Thank you Shaun !!
Got the file and I will try it on Monday!
Have a great weekend !!

 

[MD355]

So I couldn't wait until Monday, so I put the file 4602dbte1_8.bin in the TFTP server and started the 4602 phone... (Actually the file Shaun sent me was 4602dbte1_82.bin which I renamed to 4602dbte1_8.bin)

1) Immediately the phone started downloading the file and updating with 4602dbte1_8.bin

2) As soon as it was finished it restarted and the phone was asking for another file : 4602sbte1_8.bin

3) Not knowing what to do, I copied the file 4602dbte1_8.bin and renamed it to 4602sbte1_8.bin.

4) I restarted the phone and it downloaded and updated with the new file 4602sbte1_8.bin (which was actually a copy of 4602dbte1_8.bin)

5) As soon as it restarted, the phone asked for another file : 4602sape1_8.bin

6) Again not knowing what to do, I copied the file 4602dbte1_8.bin and renamed it to 4602sape1_8.bin

7) I restarted the phone and it downloaded and updated with the new file 4602sape1_8.bin (which was actually a copy of 4602dbte1_8.bin)

8) After that each time I restarted the phone, it would cycle between downloading and updating with file 4602sbte1_8.bin and 4602sape1_8.bin (neither of which I had, but I thought I had tricked the phone by copying 4602dbte1_8.bin and renaming it to 4602sbte1_8.bin and 4602sape1_8.bin) It didn't work and the phone never worked...

So now, I think I need files : 4602sbte1_8.bin and 4602sape1_8.bin
in order to make it work...

Anyone have these files and could share them with me ?

Many thanks !!!!

Makis