4422 IP Office and automatic configuration via d42x02-config.txt 1

[juasiepo]

Hi guy,

I have already configured all the stuff to get my 4422 IP Office phones automatically via the configuration file d42x02-config.txt
BUT there is a parameter I do not know how to configure.

I want all the IP phones ask for password after the extension number is typed ("Log on with:")

I can get things done via Display but not via the configuration file.

Any idea?


Best regards

Juan Sierra Pons

 

[Multivitamin86]

Hi Juan,

When you initate the IP extension you can use a parameter ipexi:dir=1234,passw=1234;

Best Regards

 

[juasiepo]

Hi,

Thank you for your quickly reply.

IP extension nomber/code are already configured so "ipexi:dir=1234,passw=1234;" was already done

When I first plug a new phone it download from the webserver the d42x02-config.txt and configures itself properly. After that the IP phone shows the message:
"Log on with"
Here I must insert the extension but the IP phone doesn't ask for the password.

If I want the phone ask about the password I must perform the following steps manually in the IP phone:
Settings->Password->switch from NO to YES

After that the IP phone ask for the password. I want to avoid th manually part

Thank you

Juan

 

[whosrdaddy]

you must enable the line
LogOffRestriction=PermitIndividualLogOn
under the [system] section in the config file.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[juasiepo]

Done but it is the same
Password is not beeing asked

Any other idea?

 

[whosrdaddy]

when the user leaves the desk he must logoff the phone?

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[juasiepo]

Hi,

Not necessary.
The problem is the first logon as the Ip Phone doesn't ask for the password when configured automatically from the d42x02-config.txt file.
If I set (from the display) the password setting to yes. The phone always ask for it

Any other idea?

Thank you

Juan

 

[whosrdaddy]

there is a parameter (checked in version R7M)
called "SaveUserPassword" under the section [Security].
set it to No and you will have the desired behaviour

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[juasiepo]

Thank Daddy for your quick answer

Parameter changed with not sucess.

Any other idea?

Best regards


Juan

 

[whosrdaddy]

what is the firmware version of your IP extension?
check with C * 4 combination (or via webpage)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[juasiepo]

I get the following output

CAA1580043 R7E
CAA1580044 R3L
CAA1580045 R7C

Thank you

 

[whosrdaddy]

you need to upgrade (Application must be R7M)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[juasiepo]

Hi Daddy

It works perfectly with the new upgrade (R7M)

Thank you very much for your time and knowledge

Best regards

Juan