Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

4422 IP Office and automatic configuration via d42x02-config.txt 1

Status
Not open for further replies.

juasiepo

Technical User
May 27, 2010
21
ES
Hi guy,

I have already configured all the stuff to get my 4422 IP Office phones automatically via the configuration file d42x02-config.txt
BUT there is a parameter I do not know how to configure.

I want all the IP phones ask for password after the extension number is typed ("Log on with:")

I can get things done via Display but not via the configuration file.

Any idea?


Best regards

Juan Sierra Pons
 
Hi Juan,

When you initate the IP extension you can use a parameter ipexi:dir=1234,passw=1234;

Best Regards
 
Hi,

Thank you for your quickly reply.

IP extension nomber/code are already configured so "ipexi:dir=1234,passw=1234;" was already done

When I first plug a new phone it download from the webserver the d42x02-config.txt and configures itself properly. After that the IP phone shows the message:
"Log on with"
Here I must insert the extension but the IP phone doesn't ask for the password.

If I want the phone ask about the password I must perform the following steps manually in the IP phone:
Settings->Password->switch from NO to YES

After that the IP phone ask for the password. I want to avoid th manually part :p

Thank you

Juan
 
you must enable the line
LogOffRestriction=PermitIndividualLogOn
under the [system] section in the config file.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Done but it is the same
Password is not beeing asked

Any other idea?
 
when the user leaves the desk he must logoff the phone?

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Hi,

Not necessary.
The problem is the first logon as the Ip Phone doesn't ask for the password when configured automatically from the d42x02-config.txt file.
If I set (from the display) the password setting to yes. The phone always ask for it

Any other idea?

Thank you

Juan
 
there is a parameter (checked in version R7M)
called "SaveUserPassword" under the section [Security].
set it to No and you will have the desired behaviour

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Thank Daddy for your quick answer

Parameter changed with not sucess.

Any other idea?

Best regards


Juan
 
what is the firmware version of your IP extension?
check with C * 4 combination (or via webpage)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 

I get the following output

CAA1580043 R7E
CAA1580044 R3L
CAA1580045 R7C

Thank you
 
you need to upgrade (Application must be R7M)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Hi Daddy

It works perfectly with the new upgrade (R7M)

Thank you very much for your time and knowledge

Best regards

Juan
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top