Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

411

Status
Not open for further replies.

Lopsey

Technical User
Jul 5, 2012
18
US
good morning
i would like our 411 to dial a certain number.almost like autodial
software is a 6.0
Thankyou
PETER
 
ch ars digit converion
match min max del replacement string net conv ani req

411 11 11 2 18448198244 ars n n
didn't seem to work
Peter
 
use uniform dial plan first then send to ars

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.
 
what's with the 11 it should be 3 3 delete 3 insert number, Also conversion needs to be yes
 
yes i change udp
will not let me use min and max at 3 need to put 11 there i believe
Peter
 
no it needs to be ars and it will let you program as 3 as I just did it here in our shop
 
make an entry in ars for 411 treat it like a 911 call then ars digit conversion will work the way I told you to set it up
 
It is ars analysis
411 min3 max3 p10 svcl n
Peter
 
I don't know why it will not take 3 as I just did it on our pbx and it worked fine
 
It has the threes in all ready route pat is p10
Peter
 
and you are deleting 3 and set to ars with conversion set to yes?
 
please post a screen shot of how you have it programmed now
 
sorry it so long to get back
had to call contractor [sucks] but they figured it
we have individual port network not system
he change digit conversion locations
have not had time to check all buildings
seems to work fine
Peter
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top