411

[Lopsey]

good morning
i would like our 411 to dial a certain number.almost like autodial
software is a 6.0
Thankyou
PETER

 

[phoneguy55]

ars digit conversion

 

[Lopsey]

ch ars digit converion
match min max del replacement string net conv ani req

411 11 11 2 18448198244 ars n n
didn't seem to work
Peter

 

[montyzummer]

use uniform dial plan first then send to ars

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.

 

[joe2938]

what's with the 11 it should be 3 3 delete 3 insert number, Also conversion needs to be yes

 

[Lopsey]

yes i change udp
will not let me use min and max at 3 need to put 11 there i believe
Peter

 

[joe2938]

no it needs to be ars and it will let you program as 3 as I just did it here in our shop

 

[joe2938]

make an entry in ars for 411 treat it like a 911 call then ars digit conversion will work the way I told you to set it up

 

[Lopsey]

It is ars analysis
411 min3 max3 p10 svcl n
Peter

 

[joe2938]

I don't know why it will not take 3 as I just did it on our pbx and it worked fine

 

[Lopsey]

It has the threes in all ready route pat is p10
Peter

 

[joe2938]

and you are deleting 3 and set to ars with conversion set to yes?

 

[Lopsey]

no leaving them at 3

 

[joe2938]

please post a screen shot of how you have it programmed now

 

[Lopsey]

sorry it so long to get back
had to call contractor [sucks] but they figured it
we have individual port network not system
he change digit conversion locations
have not had time to check all buildings
seems to work fine
Peter