Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
3com corebuilder password problem
- Thread starter albie3
- Start date
TimRegester
Technical User
Try tech/tech it may be that the previous owners did not reset this password but left it as default the same goes for debug/synnet
Search at the 3com Website for "3c37000" and download the firmware update to version 4.10 (or higher). Unzip the files and look for a dos batch file fls_util.bat.
Connect a PC's serial port to the service port (19k2 bit/s),
press CTRL-U a few times (Capital!), shutdown your terminal program. Start the batch, after the established connection to the Corebuilder there is a menue item "reset configuration" or similar.
Connect a PC's serial port to the service port (19k2 bit/s),
press CTRL-U a few times (Capital!), shutdown your terminal program. Start the batch, after the established connection to the Corebuilder there is a menue item "reset configuration" or similar.
- Status
Similar threads
- Locked
- Question
- Locked
- Question