Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3C16988A 3300MM - default IP - basic question

Status
Not open for further replies.

ircaddict

Technical User
Jan 26, 2006
5
AU
Hi, is the 3C16988A set to DHCP client mode after a reset?

I have just purchased a second hand unit and i am trying to give it an ip. Or does this sort of thing have to be done through the console port?

cheers
 
Hi - connected it up via the console port and assigned it an ip :) sorted.
 
3300s are only in DHCP if from the factory or the IP interface is reset (from telnet or console).

The "factory default" option does just that EXCEPT for the IP.

 
I have the same problem, I bought the switch second hand over the summer and it's been working, except i can't manage it.
My laptop doesnt' have a serial port so i can't console into it.
I have a Cisco console cable, would that work as it has RJ-45 on one end and seriel on the other?

I'd like to get this switch manageable.

Thanks!
- Andy
 
Hi - a cisco console cable will not work. It is wired up different from a normal null modem serial cable for starters. I have a usb - serial convertor. I will see if i can get this to work with the null modem cable i made up. Will reply soon.
 
Hi Beholder - I have managed to use a usb-serial convertor (costs around $15 - $20 - try ebay.com) successfully to connect. Once you have connected to the serial port (9600, n, 8, 1) it is fairly straightforward to set IP. see screen capture of session below. to reset back to factory default which doesnt reset the ip but resets password if one has been set try login 3comcso password RIP000 or login recover password recover. If these don't work. send a post :)

Menu options: -------------3Com SuperStack 3 Switch 3300MM--------------
bridge - Administer bridging/VLANS
ethernet - Administer Ethernet ports
feature - Administer system features
ip - Administer IP
logout - Logout of the Command Line Interface
snmp - Administer SNMP
system - Administer system-level functions

Type ? for help.
----------------------------------Switch 3300MM (1)---------------------
Select menu option: ip

Menu options: -------------3Com SuperStack 3 Switch 3300MM--------------
initializeConfig - Reset IP information to factory defaults
interface - Administer IP
ping - Poll remote device

Type "q" to return to the previous menu or ? for help.
----------------------------------Switch 3300MM (1)---------------------
Select menu option (ip): interface

Menu options: -------------3Com SuperStack 3 Switch 3300MM--------------
bootp - Enable/Disable BOOTP
define - Set IP interface information
display - Display IP interface information

Type "q" to return to the previous menu or ? for help.
----------------------------------Switch 3300MM (1)---------------------
Select menu option (ip/interface): define
Enter IP address [192.168.2.10 ]:
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top