3300 Upgrade failure

[teeson77]

I recently attempted an upgrade on my 3300 to 9.0.1.7 and unfortunately it seems my PC went to sleep during the upgrade, causing the process to fail.

Now I can no longer access the unit and the leftmost LED just flashes RED. When I access the unit through the console port, I only see consecutive "X" on the Hyperterminal window.

Is this box toast??

Thanks

 

[kwbMitel]

Continuous xx'x usually indicates you are connected at the wrong baud rate.

9600,n,8,1 is the standard rate.

What type of controller are you working with?

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[kwbMitel]

Continuous xx's usually indicates you are connected at the wrong baud rate.

9600,n,8,1 is the standard rate.

What type of controller are you working with?

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[brewski6666]

same thing hapened to me few day ago.i have reinstalled manualy the software via the serial port (the procedure in explained in the tchnician's handbook)and i restored the database with success.

 

[teeson77]

I have now accessed the 3300 via console port. I am trying to upgrade the software using my PC as an FTP server via the motfcc process (page 165 of the technician handbook). But I am unable to connect to the FTP Server from the 3300 (I see no connection requests in the FTP log).

I know the FTP server is working properly cause I can connect to the FTP with another PC without any issues.

Any ideas?

 

[tlpeter]

Did you set it up right in the Mitel ?

Can you show us ?


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[teeson77]

I have the 3300 set as 192.168.1.2 and the laptop statically set to 192.168.1.50. I can ping from the laptop to 192.168.1.2 but only when the cat5 is connected to the 10/100/1G LAN port. When connected to one of the other 16 LAN ports, I get no response.

Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...


boot device : motfcc
unit number : 0
processor number : 0
file name : Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h) : 192.168.1.50
gateway inet (g) : 192.168.1.1
user (u) : greggt
ftp password (pw) : password
flags (f) : 0x0
other (o) : motfcc

Attached TCP/IP interface to motfcc0.
Attaching network interface lo0... done.
Loading...

After this it says error loading file: errno 0x3C. Also, I do not see a connection attempt on my laptop FTP server.

thanks

 

[tlpeter]

You need to be connected straight on the Mitel, no other networking on it !!!

Do you have a firewall running ?
I did have this problem with Mcafee !


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[teeson77]

Damn McAfee. Working like a charm now!!!!

Thanks a ton

 

[tlpeter]

I know just because i this too
Took me a couple of weeks and a reinstall of XP to find out

Good luck woth the rest

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!