3300 ICP Triggering Fire/Tornado Alarms

[Mgoddard]

I have been tasked with trying to use our Mitel 3300ICP to be able to call in and trigger our FIRE/TORNADO alarms remotely. Is this possible using DID? Would i just assign an access code for it. Any advice is greatly welcomed. Thank you.

 

[gweetz]

We need far more information ... model of 3300? Software release? Does 3300 have an Analog Main Board (AMB)? How are the Fire/Tornado alarms triggered now? What is that system? Details, details, details...

 

[Billz66]

Depending upon what is required to trigger the Alarm , if its a simple relay activation then
I would look at something external like an Algo 8180 sip device , program it as a generic sip extension in mitel , program it via its web interface , relay can be activated when rung .

As mentioned though without more system details its hard to offer other options.
There are lots of other options like door stations that have relay contacts as well



If I never did anything I'd never done before , I'd never do anything.....

 

[LoopyLou]

Yep we need more to work with. What is the process to turn on the alarms? Is it some type of Computer with a modem connection?

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.