Eric121508
Programmer
This is my first 3300 ICP install and im having a rough time.
I upgraded it to 14.0.0.95 with the sw installer successfully. Then I programmed the IP info on it, and registered 2 IP phones to it.
I was then trying to program the AMB but it wasnt accepting the PLID so I was going back through the install docs, I serialed into the system, and logged into vxworks and confirmed the info in the boot menu.
All looked well so I selected boot and go, and then it got stuck on "Error 132 Bytes (Partial Record).
When it finally came back up all my users and IPs I programmed were lost. I tried restoring from a backup I had done recently, and it brought back my IPs but not my user data, and im still getting the error below:
Any help would be much appreciated!!
Thanks,
Eric
I upgraded it to 14.0.0.95 with the sw installer successfully. Then I programmed the IP info on it, and registered 2 IP phones to it.
I was then trying to program the AMB but it wasnt accepting the PLID so I was going back through the install docs, I serialed into the system, and logged into vxworks and confirmed the info in the boot menu.
All looked well so I selected boot and go, and then it got stuck on "Error 132 Bytes (Partial Record).
When it finally came back up all my users and IPs I programmed were lost. I tried restoring from a backup I had done recently, and it brought back my IPs but not my user data, and im still getting the error below:
Any help would be much appreciated!!
Thanks,
Eric
Code:
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel MMC-C PPC83XX F2500
Version: VxWorks5.5.2
BSP version: 3.1/15
Creation date: Oct 20 2014, 15:43:02
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4>
[VxWorks Boot]:
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
boot device: ata=[ctrl,drive | noauto | auto] file name: [/partition1/]vxWorks
Boot flags:
0x02 - load local system symbols
0x04 - don't autoboot
0x08 - quick autoboot (no countdown)
0x20 - disable login security
0x40 - use dhcp to get boot parameters
0x80 - use tftp to get boot image
0x100 - use proxy arp
available boot devices:Enhanced Network Devices
qefcc0 ata
[VxWorks Boot]: p
boot device : ata=0,0
unit number : 0
processor number : 0
file name : /partition1/RTC8260
inet on ethernet (e) : 172.16.0.2:ffffff00
gateway inet (g) : 172.16.0.1
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0
other (o) : qefcc
[VxWorks Boot]: @
boot device : ata=0,0
unit number : 0
processor number : 0
file name : /partition1/RTC8260
inet on ethernet (e) : 172.16.0.2:ffffff00
gateway inet (g) : 172.16.0.1
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0
other (o) : qefcc
Disk Configuration Started.
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
0KB added to /partition1 partition
free disk space after partition 0 is 0KB
0KB added to /partition2 partition
free disk space after partition 1 is 0KB
0KB added to /partition3 partition
free disk space after partition 2 is 0KB
0KB added to /partition4 partition
free disk space after partition 3 is 0KB
Attaching to partition table for 4 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/partition1) on controller 0 drive 0... done.
Creating Cache Layer for partition 1 (/partition2) on controller 0 drive 0... done.
Creating Cache Layer for partition 2 (/partition3) on controller 0 drive 0... done.
Creating Cache Layer for partition 3 (/partition4) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/partition1) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/partition2) on controller 0 drive 0... done.
Creating Dos FS device for partition 2 (/partition3) on controller 0 drive 0... done.
Creating Dos FS device for partition 3 (/partition4) on controller 0 drive 0... done.
Disk Configuration Complete.
Loading /partition1/RTC8260...70967792
Starting at 0x10000...
ataGetDiskSize(0,0) = 131071MB
40G/80G drive partitioning scheme
Disk Configuration Started.
Creating block device for controller 0 drive 0... -> done.
Creating CBIO device for controller 0 drive 0... done.
0KB added to /sysro partition
free disk space after partition 0 is 0KB
0KB added to /db partition
free disk space after partition 1 is 0KB
0KB added to /vmail partition
free disk space after partition 2 is 0KB
0KB added to /inactive/sysro partition
free disk space after partition 3 is 0KB
0KB added to /inactive/db partition
free disk space after partition 4 is 0KB
0KB added to /unused partition
free disk space after partition 5 is 0KB
Attaching to partition table for 6 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/sysro) on controller 0 drive 0... done.
Creating Cache Layer for partition 1 (/db) on controller 0 drive 0... done.
Creating Cache Layer for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Cache Layer for partition 3 (/inactive/sysro) on controller 0 drive 0... done.
Creating Cache Layer for partition 4 (/inactive/db) on controller 0 drive 0... done.
Creating Cache Layer for partition 5 (/unused) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/db) on controller 0 drive 0... done.
Creating Dos FS device for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Dos FS device for partition 3 (/inactive/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 4 (/inactive/db) on controller 0 drive 0... done.
Creating Dos FS device for partition 5 (/unused) on controller 0 drive 0... done.
Disk Configuration Complete.
/vmail/ - disk check in progress ...
/sysro/ - disk check in progress ...
dosChkLib : CLOCK_REALTIME is being reset to THU JAN 19 16:09:38 2017
Value obtained from file system volume descriptor pointer: 0x3c7232f8
The old setting was THU JAN 01 00:00:05 1970
Accepted system dates are greater than THU DEC 27 00:00:00 1990
/sysro/ - Volume is OK
total # of clusters: 41,938
# of free clusters: 15,413
# of bad clusters: 0
total free space: 493,216 Kb
# of files: 12,100
# of folders: 622
total bytes in files: 505,195 Kb
# of lost chains: 0
total bytes in lost chains: 0
/vmail/ - Volume is OK
total # of clusters: 3,683,770
# of free clusters: 3,572,068
# of bad clusters: 0
total free space: 13,953 Mb
# of files: 481
# of folders: 125
total bytes in files: 445,432 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x3c70cbf8
cache block I/O descriptor ptr (cbio): 0x3c763568
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_1
volume write mode: copyback (CBIO_WRITE)
max # of simultaneously open files: 602
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /vmail ; (in boot sector: )
- volume Id: 0x2f80000
- total number of sectors: 29,527,848
- bytes per sector: 512
- # of sectors per cluster: 8
- # of reserved sectors: 32
- FAT entry size: FAT32
- # of sectors per FAT copy: 28,836
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 57,704
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start cluster: 2
FAT handler information:
------------------------
- allocation group size: 369 clusters
- free space on volume: 14,631,194,626 bytes
/db/ - disk check in progress ...
"/db/cc/redundb/transient.19000" too many clusters in file, adjusted.
"/db/cc/redundb/permanent.19000" too many clusters in file, adjusted.
"/db/database/files/pstswlog.db2" too many clusters in file, adjusted.
Errors detected. All corrections stored to disk and lost chains recovered.
total # of clusters: 2,009,325
# of free clusters: 1,983,692
# of bad clusters: 0
total free space: 7,748 Mb
# of files: 1,045
# of folders: 191
total bytes in files: 98,186 Kb
# of lost chains: 3
total bytes in lost chains: 1,596 Kb
volume descriptor ptr (pVolDesc): 0x3c70d620
cache block I/O descriptor ptr (cbio): 0x3c9635f8
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_1
volume write mode: copyback (CBIO_WRITE)
max # of simultaneously open files: 602
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /db ; (in boot sector: )
- volume Id: 0x2670000
- total number of sectors: 16,106,076
- bytes per sector: 512
- # of sectors per cluster: 8
- # of reserved sectors: 32
- FAT entry size: FAT32
- # of sectors per FAT copy: 15,729
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 31,490
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start cluster: 2
FAT handler information:
------------------------
- allocation group size: 201 clusters
- free space on volume: 8,126,836,730 bytes
volume descriptor ptr (pVolDesc): 0x3c7232f8
cache block I/O descriptor ptr (cbio): 0x3c983ad0
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_1
volume write mode: copyback (CBIO_WRITE)
max # of simultaneously open files: 602
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: /sysro ; (in boot sector: )
- volume Id: 0x21f0000
- total number of sectors: 2,684,304
- bytes per sector: 512
- # of sectors per cluster: 64
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 164
- # of FAT table copies: 2
- # of hidden sectors: 0
- first cluster is in sector # 361
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start sector: 329
- # of sectors per root: 32
- max # of entries in root: 512
FAT handler information:
------------------------
- allocation group size: 5 clusters
- free space on volume: 505,053,184 bytes
0x3f7ffe00 (tRootTask): Warning: Task name tRootTask changed directory (cd) to /sysro
Last reset cause was (0x83) POWER_ON_RESET
There is no host relink.
There is no relink on the disk.
relink_call_ctors start
relink_call_ctors done
will run the startup scripts in the following order:
s05debug
s08e2tconfig
s09sdsAlarm
s10startup
s20tftp
Executing s10startup script
16:10 up 0 days, 0:00:29
SPIStart: brgClk 199999800Hz, SPI CLK 781249.250000Hz, PM 3, div16 TRUE
Adjusted SPI CLK 1041665.687500Hz
SPI clk difference 4.166569%
Final SPI CLK 1041665.687500Hz, PM 2, div16 TRUE
resetLog (version 2) enabled @ 0x3F800000
Disabled L2 Switch port 2
...Creating appStartup.log
Setting MICFG_ATTR_CONFIG_FROM_FILE
Starting MnTftpServer
Directory: /sysro/tftp
appStartup complete
17:57 up 0 days, 0:00:30
MnTftpSetMaxSessions 10
MnTftpSetPriority 192
MnTftpEnableStallDetection 0
MnTftpSetTimeoutParams 0,0,3000
MnTftpSetMaxReadLoop 5
MnTftpSetConsoleLogs 0
Max Worker Threads: 100 Worker Thread timeout: 120
File Memory Cache is: Off, Cache Expiry: 10 Seconds
Max File Handles: 40 Max File Size: 15728640 bytes
MnTftp complete
17:57 up 0 days, 0:00:30
deleting file /db/database/__db.001
copying file /sysro/webs/web/uwi/Tree/TreeDefs.xml -> /sysro/webs/web/uwi/Tree/curTreeDefs.xml
copying file /sysro/webs/web/uwi/Tree/UIDefs.xml -> /sysro/webs/web/uwi/Tree/curUIDefs.xml
Reboot - Don't delete chksmdta.db (Checksum Database File)
/inactive/sysro/ - disk check in progress ...
/inactive/sysro/ - Volume is OK
total # of clusters: 41,938
# of free clusters: 7,710
# of bad clusters: 0
total free space: 246,720 Kb
# of files: 12,487
# of folders: 638
total bytes in files: 742,766 Kb
# of lost chains: 0
total bytes in lost chains: 0
Management Layer AVS SUCCESSFULLY started.
12:58 up 0 days, 0:01:36
Loading JavaLayer_link.out .............Loaded
PERC_CLASSPATH=/sysro/webs/Perc5/lib:/sysro/webs/Perc5/lib/ojdk.jar:/sysro/webs/Perc5/lib/ojdkswing.jar:/sysro/webs/Perc5/lib/perclib.jar:/sysro/webs/Perc5/lib/perctool.jar:/sysro/webs/Perc5/lib/gcp.jar:/sysro/webs/common/lib:/sysro/webs/common/lib/JavaLayerWrapper.jar:/sysro/webs/Perc5/lib/jdtcore.jar
-pri
152-170:2
-run-once
-cssize
150k
-Djava.home=/sysro/webs/Perc5
-Dcatalina.home=/sysro/webs
-Dcatalina.base=/sysro/webs
-Djava.security.manager
-Djava.security.policy=/sysro/webs/Perc5/lib/security/java.policy
-Dgnu.classpath.vm.shortname=java
-Djavax.xml.xpath.XPathFactory:[URL unfurl="true"]http://java.sun.com/jaxp/xpath/dom=net.sf.saxon.xpath.XPathFactoryImpl[/URL]
-Dgnu.classpath.home.url=file://file:///sysro/webs/Perc5/lib
-Dgnu.classpath.home.url=file:///sysro/webs/Perc5/lib
-Dorg.apache.commons.logging.Log=com.mitel.milog4j.MiLog4jLogger
-Dcom.mitel.missl4j.SocketImplFactory=com.mitel.esmgmt.core.JavaLayerSocketImplFactory
(null)
-cssize
150k
-tickperiod
20000
-timeslice
2
-numregs
20
-regsize
1024k
gnu.classpath.home.url=file:///sysro/webs/Perc5/lib/
Done JLC.InitializeJNIAdapter
JLC.start
Java Layer SUCCESSFULLY started.
12:59 up 0 days, 0:01:59
ChubSp SUCCESSFULLY started.
12:59 up 0 days, 0:01:59
ResourceAlarmStartup ready.
appStartupPart2 done
12:59 up 0 days, 0:01:59
IPN Database done
12:59 up 0 days, 0:02:00
Internal Layer 2 Switch IP address is 172.16.0.1.
Voice VLAN 1, Priority 6.
CFE ENV up to date (no change).
MIPS Service Provider SUCCESSFULLY started.
MIPS Logger Task SUCCESSFULLY started.
12:59 up 0 days, 0:02:01
## CC memory LOS key: PPC_EMULATOR_SPACE_700_30= ##
## CC memory size : 0x2781ee0(41426656) ##
Starting 68k Emulator 0.
Call Engine Layer Coordinator SUCCESSFULLY started.
Reminder: use -d option when running dbasrv from command line.
13:00 up 0 days, 0:02:44
ENABLING COMMANDS
unable to open /sysro/install/3300Upgrade_State.txt
Unable to read 3300Upgrade_State.txt
Upgrade not in progress
ESM iPVM_StartUp waiting for voice mail loader to start.
IPN DBA Starting up!!
No Email Params found... Email Task not started.
deleting file /sysro/webs/web/uwi/Tree/MasterTree.xml
adding names to certificate
added CN = mitel networks icp web server
added CN = local_75:8080
added CN = 10.40.208.75:8080
added CN = vxtarget:8080
added CN = 192.168.1.2:8080
added CN = 172.16.0.2:8080
cert modified
JLC.registerJavaLayerApp(com.mitel.apps.security.sso.startup.SSOStartupCoordinator,singleton)
AppObjectName: com.mitel.apps.security.sso.startup:host=JavaLayer,type=SSOStartupCoordinator,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.apps.security.sso.esm_sso.ESM_SSO_InterfaceImpl,singleton)
AppObjectName: com.mitel.apps.security.sso.esm_sso:host=JavaLayer,type=ESM_SSO_InterfaceImpl,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.esmgmt.core.tomcat.JavaLayerTomcatJLImpl,singleton)
AppObjectName: com.mitel.esmgmt.core.tomcat:host=JavaLayer,type=JavaLayerTomcatJLImpl,instance=singleton
JLC.startJavaLayerApp
Jan 19, 2017 1:00:40 PM org.apache.catalina.startup.Embedded start
INFO: Starting tomcat server
Jan 19, 2017 1:00:41 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.39
Jan 19, 2017 1:01:00 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-172.16.0.2-80
Jan 19, 2017 1:01:01 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-172.16.0.2-80
Jan 19, 2017 1:01:06 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-172.16.0.2-443
Jan 19, 2017 1:01:06 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-172.16.0.2-443
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.gdc4j.GDC4jManagerJLImpl,singleton)
AppObjectName: com.mitel.esmgmt.app.gdc4j:host=JavaLayer,type=GDC4jManagerJLImpl,instance=singleton
JLC.startJavaLayerApp
GDC4j running...
JLC.registerJavaLayerApp(com.mitel.esmgmt.core.LocalManagedDns.LocalManagedDnsStartup,singleton)
AppObjectName: com.mitel.esmgmt.core.LocalManagedDns:host=JavaLayer,type=LocalManagedDnsStartup,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.backuprestore.BackupRestoreService,singleton)
AppObjectName: com.mitel.esmgmt.app.backuprestore:host=JavaLayer,type=BackupRestoreService,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.scheduler.application.ApplicationController,singleton)
AppObjectName: com.mitel.esmgmt.app.scheduler.application:host=JavaLayer,type=ApplicationController,instance=singleton
JLC.startJavaLayerApp
***SSO has been enabled
0x33e68d30: SetTransportMode: TCPUnicast
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.mnma.db.dbfma.DBFMAJLImpl,singleton)
AppObjectName: com.mitel.esmgmt.app.mnma.db.dbfma:host=JavaLayer,type=DBFMAJLImpl,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.mnma.db.dbmnma.DBMNMAJLImpl,singleton)
AppObjectName: com.mitel.esmgmt.app.mnma.db.dbmnma:host=JavaLayer,type=DBMNMAJLImpl,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.mnma.fma.aacJLImpl,singleton)
AppObjectName: com.mitel.esmgmt.app.mnma.fma:host=JavaLayer,type=aacJLImpl,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.mnma.fma.asaJLImpl,singleton)
AppObjectName: com.mitel.esmgmt.app.mnma.fma:host=JavaLayer,type=asaJLImpl,instance=singleton
JLC.startJavaLayerApp
JLC.registerJavaLayerApp(com.mitel.esmgmt.app.IDS.startup.IdsStartup,singleton)
AppObjectName: com.mitel.esmgmt.app.IDS.startup:host=JavaLayer,type=IdsStartup,instance=singleton
JLC.startJavaLayerApp
New IDS debug level request: 0
JLC.registerJavaLayerApp(com.mitel.esmgmt.apps.reachthrough.ReachThroughAppsStartup,singleton)
AppObjectName: com.mitel.esmgmt.apps.reachthrough:host=JavaLayer,type=ReachThroughAppsStartup,instance=singleton
JLC.startJavaLayerApp
Management Layer SUCCESSFULLY started.
13:02 up 0 days, 0:04:46
Start DHCP service
13:02 up 0 days, 0:04:46
Start DNS-QryMgr service
DNS-QryMgr service done
13:02 up 0 days, 0:04:46
IPN Data Services done
13:02 up 0 days, 0:04:46
EtxOn done
13:02 up 0 days, 0:04:46
MCC initializing with ST TDM Bus connectivity @ 16Mbs.
0x45df4c0 (tAppStartup):
DW pool created with 8192 buffers, platform: 2500
Initialized and enabled Mcc1.
-----> Mitel E2T initializing <-----
My Processor ID is 1, IP 172.16.0.2
E2T Startup: E2T IP address = 172.16.0.2
E2T Startup: RTC IP address = 172.16.0.2
Stream_T2E_Startup, binding 64 RTP ports (even ports) in the range of 50000 to 50126 starting at MMC Ch 192
There were 64 UDP ports created.
Stream_T2E_Startup, binding 64 RTCP ports (odd ports) in the range of 50001 to 50127 starting at MMC Ch 192
There were 64 RTCP ports created.
Stream_T2E_Startup, binding 128 T38 ports (even ports) in the range of 50128 to 50383 starting at MMC Ch 256
There were 128 T38 ports created.
tMediaControl: RTC IP: 172.16.0.2
tMediaControl E2t<->E2tProxy MCT communications established; processor ID 1
E2T Startup: TDM codec is U_LAW_CODEC
Applying Default Loading Option
Dsp List Filename: "/sysro/DspConfig/dsplist.txt"
copying file /sysro/DspConfig/PLATFORM_MXe_Default/LoadingMXe.txt -> /sysro/DspConfig//LoadingMXe.txt
Applying the Default Dsp Business Option
copying file /sysro/DspConfig/DSP_Default/DSPType3300.txt -> /sysro/DspConfig//DSPType3300.txt
copying file /sysro/DspConfig/DSP_Default/DSPTypeCX.txt -> /sysro/DspConfig//DSPTypeCX.txt
copying file /sysro/DspConfig/DSP_Default/DSPTypeCXiII.txt -> /sysro/DspConfig//DSPTypeCXiII.txt
copying file /sysro/DspConfig/DSP_Default/DSPTypeEmerald.txt -> /sysro/DspConfig//DSPTypeEmerald.txt
copying file /sysro/DspConfig/DSP_Default/DSPTypeMXe.txt -> /sysro/DspConfig//DSPTypeMXe.txt
Dsp Config Filename: "/sysro/DspConfig/dspConfigMXe.txt"
Dsp Card Type Filename: "/sysro/DspConfig/DSPCardTypeMXe.txt"
Dsp Type Filename: "/sysro/DspConfig/DSPTypeMXe.txt"
Dsp Dynamic Loading Filename: "/sysro/DspConfig/LoadingMXe.txt"
StartUp - Booting DSP card in slot 7 (1-based)
StartUp - Finished booting all DSP cards.
T38 Startup Priority = 70
Assigning MsgQId 0x5981128 to T38MsgQId
INFO Low Mips EchoCanceller Found
###########################################################
#
# DO NOT POWER DOWN !!!
#
# Wait for the onboard Analog module to finish uploading.
#
###########################################################
Service Layer Coordinator SUCCESSFULLY started.
13:02 up 0 days, 0:04:56
License Management SUCCESSFULLY started.
13:02 up 0 days, 0:04:56
E2tProxy<->E2t collocated Communications Channel is UP
Network Service Layer Coordinator SUCCESSFULLY started.
13:02 up 0 days, 0:05:00
######################################################
#
# Onboard Analog module has finished uploading.
#
######################################################
Adaptation Layer Coordinator SUCCESSFULLY started.
13:02 up 0 days, 0:05:16
Call Control Services Coordinator SUCCESSFULLY started.
13:02 up 0 days, 0:05:16
MiXML Layer Coordinator SUCCESSFULLY started.
13:02 up 0 days, 0:05:16
Applications Layer Coordinator SUCCESSFULLY started.
13:02 up 0 days, 0:05:16
Starting the Loader Manager Component...
CConnectionManagerServerEx::InitDSConfig(): success
Loading SIP_SDK_link.out ...............Loaded
SIP Module Coordinator SUCCESSFULLY started.
Determine Voice Mail Needed and start if it is.
ESM iPVM_StartUp waiting for voice mail to start.
AVS DbSessionId=11 opened from (/CAVH_SysCap.cpp:657 )
AVS DbSessionId=12 opened from (/XA_Data.cpp:1295 )
AVS DbSessionId=41 opened from (/AS_AuditTrailUtils.cpp:1043 )
Q2KDrv::SXInit - Initializing Q2K Driver
Starting up VM Corp Dir...
Starting up SMTP Client
Starting up SMTP Server
Viper is ready
Starting iPVM Version 15.0.0.57
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)
ERROR: 132 bytes(partial record)Initialization error
iPVM stopped.
Voice Mail Did not start Successfully
VoiceMail Ready semGive for !IsCS
CConnectionManagerServerEx::EstablishClientConnection: 172.16.0.2:49503
Loader Manager Component SUCCESSFULLY started.
13:05 up 0 days, 0:08:24
13:05 up 0 days, 0:08:24
Clock Synchronisation SUCCESSFULLY started.
13:05 up 0 days, 0:08:24
13:05 up 0 days, 0:08:24
Compare_Bootrom: loading bootrom S-records - please wait...
CConectionOperation::ThreadEntryRoutine: Adding reference for ip 172.16.0.2
Compare_Bootrom: comparing 983040 bytes in bootrom images...
Compare_Bootrom: bootrom images same - no upgrade required
Compare_Xilinx: comparing 262144 bytes in FPGA images...
moving file /db/appcfg/temp_appcfg -> /db/appcfg/appcfg_avail
Compare_Xilinx: FPGA images same - no upgrade required
dspIIFpgaVerify: slot 1, DSP II Card not present
dspIIFpgaVerify: slot 2, DSP II Card not present
dspIIFpgaVerify: slot 3, DSP II Card not present
dspIIFpgaVerify: slot 4, DSP II Card not present
dspIIFpgaVerify: slot 5, DSP II Card not present
dspIIFpgaVerify: slot 6, DSP II Card not present
dspIIFpgaVerify: slot 7, DSP II Card not present
dspIIFpgaVerify: SUCCESS, All Dsp II Cards Flash match FPGA File
Compare_430: MSP430 images are up to date and do not require upgrade.
13:05 up 0 days, 0:08:26
13:05 up 0 days, 0:08:26
13:05 up 0 days, 0:08:26
Hog Alert Start done
13:05 up 0 days, 0:08:26
Exiting s10startup script
Task StartupHwRst being deleted while ACTIVE
Established communication with L2 subsystem