Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3300 AX ICP>5540 IP Console>Wake Up Call Timer 1

Status
Not open for further replies.

jabbo99

Technical User
Nov 4, 2013
957
US
Is there a timer to set the amount of time between wakeup calls? Right now, I set all three wakeup calls from the console. However, any wakeup call set within 30 minutes of the previous one will not be accepted. Anything after 30 minutes will be accepted. For example,

Wakeup call 1 set for 4:50pm will work
Wakeup call 2 set for 4:55pm(will not be accepted or shows invalid on console screen)
Wakeup call 2 set for 5:30pm will work.
Wakeup call 3 set for 5:35pm(will not be accepted or shows invalid on console screen)
Wakeup call 3 set for 6:05pm will work.

There is no PMS Integration.
Thanks
 
I think you will find you can set a 20 minute interval.

The system is designed to automatically call the room up to 3 times at 5 minute intervals for any one wakeup

A wakeup set for 4:50 will call at:
4:50​
4:55​
5:00​

At 5:00 it will generate an alarm if alarms are enabled and the call has been unanswered 3 times

**********************************************
What's most important is that you realise ... There is no spoon.
 
I tested it and you are right. Thank you!
 
I'm always right, haven't you figured that out yet?

I should get commission from Mitel

**********************************************
What's most important is that you realise ... There is no spoon.
 
Yep, the answers you've posted for my questions have been on target. I'm about to post another dillema. Be ready to provide another answer. [smile]

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top