ccsscotland
IS-IT--Management
Hi Guys,
Any ideas?
Shared office location - ie all offices in building going out thru 1 router (Telewest)
In the office:
3 com firewall, NAT with DHCP (but not configured)
IP Addresses that show:
10.0.0.1 (Internal I think)
62....... (External facing IP ie the router? - as this looks like a Blueyonder address, and that is who the shared office location uses as ISP
212....... (This is the IP that connects the clients to internet)
The clients are connecting to the server via DHCP, but the only way for users to get out to internet (including the W2K server) is for them to have 212. address as primary DNS, which is not correct - should be 10.0.0.2
Server has 2 NICs, but only 1 is used at the moment.
My ideas...
Reconfigure firewall? To normal setting (as they are not using NAT)
Configure static routes in DNS on the server to point at 212 IP and 62. IP
Create host record 10.0.0.1 ?
The clients cannot seem to connect to the server correctly, and "No logon server " error message in Event Viewer keeps appearing (I think because DNS is not resolving correctly)
Any thoughts you might have would be extremely helpful, and if you know of anyone who can think of a better configuration that would be most welcome!
Regards,
Gaz ;o)
Any ideas?
Shared office location - ie all offices in building going out thru 1 router (Telewest)
In the office:
3 com firewall, NAT with DHCP (but not configured)
IP Addresses that show:
10.0.0.1 (Internal I think)
62....... (External facing IP ie the router? - as this looks like a Blueyonder address, and that is who the shared office location uses as ISP
212....... (This is the IP that connects the clients to internet)
The clients are connecting to the server via DHCP, but the only way for users to get out to internet (including the W2K server) is for them to have 212. address as primary DNS, which is not correct - should be 10.0.0.2
Server has 2 NICs, but only 1 is used at the moment.
My ideas...
Reconfigure firewall? To normal setting (as they are not using NAT)
Configure static routes in DNS on the server to point at 212 IP and 62. IP
Create host record 10.0.0.1 ?
The clients cannot seem to connect to the server correctly, and "No logon server " error message in Event Viewer keeps appearing (I think because DNS is not resolving correctly)
Any thoughts you might have would be extremely helpful, and if you know of anyone who can think of a better configuration that would be most welcome!
Regards,
Gaz ;o)