Bacardi412
Technical User
I printed out a diag and the ext diag test sheet and it only recognizes the black. Will print everything in black. Any ideas. Some printheads and ink are brand new. Any help would be great. Thanks,
Bacardi
Bacardi
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2500c --- Does not recognize CYM
- Thread starter Bacardi412
- Start date
- Status
miranda8557
ISP
If it does not recognize the CMY, then you can do a cold reset without the cartridges in the printer (take EIO card out when doing so) and then it should recognize it. It should still print colour, but if not, try the cold reset. do you have the toolbox software for it?
- Thread starter
- #3
Bacardi412
Technical User
Thank you for replying. It wound up being a combination between the ink station and the ink delivery system. This machine is complete garbage and I cannot wait until they stop coming in for repair.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question