Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2400IMX list out for MBST

Status
Not open for further replies.

grh959

Technical User
Nov 14, 2003
614
US
Hi GUys, A real oldie here. 2400IMX R-11. Is there a command to list up all stations busied out with MBST? I have 3 2400's I need to look at.
 
I think the only command available is the DCON, but it's not a list out.
 
Good question, I believe I used it on IMX but it has been awhile since I have even seen one , all 9500's where I am.
 
I was surprised to find DMBS in the ICS command manual.
I don't know when that command was dropped but may have worked on R-11?
 
I don't think DMBS did a list out. I think it was by individual extension.
 
I was working on a 9500 not long ago and I was dissapointed to find out it's no longer supported.
Came in handy to find our what previous tech's did.

DMBL
CM0-03
Business, Hotel
DMBL Display of Make Busy LENS Data

1. Floppy Disk Name: CM0-03

2. Function

This command is used to print out LENS in make busy state on a system-wide basis or for each MG or each unit.
 
Not as easy but SPTS - scanning of port status will show LEN in make busy.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top