2000/3300 trunk st messages

[jazwinner]

Can anyone elaborate on exactly what "indeterminate" indicates when doing a "st 2 1 3" (or similar) command?

Also, is there a preferred setting for the link descriptor assignments for CEPT trunks (elements physically next to each other, coax connected) with respect to B8ZS suppression (yes/no), ESF (yes/no) and Inverted D channel (yes/no)? Anyone have a good 'matrix' of these proper settings based on environment?

Thanks!

 

[ianuk1974]

basicallt its not an issue, since the system or card has been loaded the tunk has just not been used, once a call has been active on the port it will dhow idle if you simplt do rts 2 1 3 the indeterminate will disappear and show idle also