inet33
IS-IT--Management
- Mar 24, 2011
- 23
I'm having a tough time getting the 1616 phone to work in DHCP mode. Just a single vlan (so the voice is on the same vlan as data).
When I first plug in it goes through the boot, then DHCP, DHCPNAK, then it times out, reboots and repeats.
In the Cisco dhcp scope, I have tried variations of the following
option 242 ascii "MCIPADD=192.168.1.200"
option 242 ascii "MCIPADD=192.168.1.200,MCPORT=1719"
option 242 ascii "MCIPADD=192.168.1.200,MCPORT=1719,L2Q=0,L2QVLAN=0"
option 242 ascii "MCIPADD=192.168.1.200,MCPORT=1719,HTTPSRVR=192.168.1.200,L2Q=0,L2QVLAN=0"
I've assigned one of the phone with a static IP and it works like a charm.
Any suggestions?
When I first plug in it goes through the boot, then DHCP, DHCPNAK, then it times out, reboots and repeats.
In the Cisco dhcp scope, I have tried variations of the following
option 242 ascii "MCIPADD=192.168.1.200"
option 242 ascii "MCIPADD=192.168.1.200,MCPORT=1719"
option 242 ascii "MCIPADD=192.168.1.200,MCPORT=1719,L2Q=0,L2QVLAN=0"
option 242 ascii "MCIPADD=192.168.1.200,MCPORT=1719,HTTPSRVR=192.168.1.200,L2Q=0,L2QVLAN=0"
I've assigned one of the phone with a static IP and it works like a charm.
Any suggestions?