128M pcmcia

[ipeology]

can i use an 128M PCMCIA card to upgrade my opt 11C?

using a Win2000 or XP PC, can i use the PCMCIA Card Programmer 9.0 to load the upgrade files, or can i use just the standard copy & paste command?

 

[one234]

Hi,

I don't think the 128MB will be a problem, but Win2k and XP will.

You need win95 to format the PCMCIA, because the PABX doesn't work with a Windows 98, 2k, xp formatted disk


Marc D.

If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...

 

[cmawbey]

You must format the card with win9x or the switch will not recognise the
card ..do not use nt/win2k/xp

cards on Rls 24 and earlier can only use 48Meg Card and Rls, 25.08 and
higher can use up to a 64 Meg Card.
if you get Type II ATA flash cards, they are usually already formatted

Colin

 

[StanleySteamer]

Version 9.0 of the CardPro fixes the Win2K formatting problem.
The readme file for v9.0 states it will format a 64MB card as well as "other sizes" though it doesn't specifically mention 128MB cards.
I have used 9.0 on Win2K with a 64MB card successfully.
Once the card has been formatted correctly I don't see why you couldn't copy and paste the files if you wanted to.