Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

1230 recording calls & beep tone

Status
Not open for further replies.
Mar 31, 2004
48
US
I have a CS1K with 1230 ip phones and we are using Telestrat Call Parrot to record calls.I was told by telestrat that the CS1K will provide the beep tone for recording calls. I can't find anything on this in the nortel/Avaya docs.
Where would this beep tone be activated from?
thanks for your help.
 
There is Conference Warning Tone option that's enabled by a dipswitch on the NT8D17 cards in a large switch. On a small switch it's done in LD 97 I think.
But that tone will be present on all conference calls. Not sure that's what you want.
You might want to consider giving callers a recorded announcement up front - "This call may be recorded for training and quality control purposes".
That beep tone is very annoying.
 
the ip phones are set up with Telstrat Call Parrot. there is a setting on the ip phones in CLS ICRA to allow the cs1k to give a beep tone. ICRA is a new CLS and I don't remember the old CLS before ICRA.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top