Search results for query: *

I have set up several netscreen-remote clients to connect to a single subnet. Now I have a need to configure a netscreen-remote client to connect to multiple subnets behind an SSG. Generally, can someone point me in the right direction? I have read a lot of material, but I need some pointers...

For the record, I didn't think he had physical access to the machine and was trying to figure out an ip.

Hmm. What kind of routers do you have at the site? From the data perspective, the IPOFFICE would have to be communicating through the router for its ip address and mac to show up. You could look at the arp cache on the router and match ip address to mac address. You would be looking at the...

Ah! A little validation from photon33 ! Thank you. It never made since to me that I am on 3.1 (on 406v1) and everyone is yelling at me to go back to 3.0.99. I figured I would run into an issue just as Photon33 describes, but I didn't know what it would be which prompted me to post here...

Wow. OK. Thanks for the input guys. Really, really didn't mean to offend anyone here. Really didn't feel like I was whining about anything, just trying to understand the inaccuracies and what people did in their best practice. Have a good weekend. BTW, Thanks again tlpeter.

Yeah, I guess I should have specified the fact I'm asking about 406v1 in the original question, but I didn't until a little later on. I'm not trying to beat this in the ground. I'm just asking the experienced experts what I should do to upgrade a 406v1 from 3.1(29) to 3.2.x. What brought this...

And so following up on tlpeter and jamie comments - 406v1 does require 3.1(65) before going to 3.2(x), but it is not available for download. In fact, 3.1(anything) isn't available for download on avaya site. Why is that? Am I still missing something here?

Ok guys - Well the 3.2 admin download included 3.0.99 bin but no 3.1(65) for the 406v1. I was sure hoping Provider was right, but 3.1.99 was the only bin included and it was for 406v2. So... What am I to do? Need to go from 3.1(29) to latest 3.2 and 3.1.65 is not available from Avaya. Anyone...

TheTaker - I don't mean to digress from original question, but I do have a 4620 that is able to get logged into system with extension #, but as soon as I start dialing a number, it goes to "disconnected". Have you seen this? I do not have a vcm installed yet. yancey may run into this as well...?

Hopefully, one of the other experts will add to this. I am trying the same thing, but with a 4620 w/ a 406 on 3.1(29). For ip to non-ip communication, the vcm is definitely needed. I thought for IP-to-IP communications the vcm would not be needed, but the manual reads (see below) that the vcm...

I'm trying to upgrade from 3.1(29) to 3.2, but need 3.1(65) to apparently get there. Why isn't 3.1 available on the Avaya site? anyone know?

The sniffer trace files never show a response from the IPOFFICE... I bet there is a problem with the firewall not allowing the IPOFFICE out.. there are connection limitations on that firewall (max #) that I had forgotten about. Thanks kwing112000 for helping me thing that through!

Absolutely. Can ping to both licensing server and IP office from subnet phone is on and can ping phone from licensing server. It does download the .scr files from the manager server.

Additional info from view on phone: def24r1_8_3.bin 46xxcommon.v83 DSPV_41D4 DSPHW < ver 5

Thanks. I did add a route, but same results.

Greetings all: I am trying to set up a single ext 4612 at a remote office. * Site-to-site VPN rock solid, good connection. * Phone is statically addressed. * Auto extn enable & Gatekeeper enabled * Extension created with IP address & user assigned. * Phone was able to contact tftp server...

Thanks for the responses guys. Anyone else with success or failure scenarios? It seems to make sense that Avaya would not support the remote offices without being connected to an IPOffice onsite as TheProvider points out and because I've not seen any examples of this. Would other agrees as...

Hey guys - 1) Does anyone have up to 6 users at a remote location successfully connecting back to the host site (IP OFFICE 406) either through VPN over broadband or leased T-1? 2) Do you have regular problems/support issues? Does Avaya support this? 3) Are you phones statically...

cargoski - I am using a static address; therefore, I do not need dhcp. I have tried it though. cztech, IPOUK, aarenot - This IP Office 406 has a PRI. Any other ideas on what I may be doing wrong?

Guys - I am trying to set up analog dial-up for remote maintenance on ver 1.4. I am following the Remote Access Setup Job Aid from 11/15/02. * Going to use an IP in same range as ipoffice subnet, so no return ip route...? * Modem2 card installed. Step 1) Create a user DI (for dial-in)...