Search results for query: *

I have tried those commands in my exchange but no result. My IP is 10.155.12.26 and remote IP is 10.155.108.200. I have initiated 2 trunks by: roeqi:rou=3,tru=2-1&&2-2,ip=10.155.108.200; but no joy ! What changes I have to make calls to other extension at remote end. Hi! Grinchstyle, Can you...

Thanks mundus ! Will give you feedback. I have arranged IPLU.Before I proceed this weekend Clarifications: 1)You said no PROUID paramaeter in both commands RIANI and RODDI, but LROUID has to be there in RIANI 2)My IP will be only in RINII command. Rest of the commands will have other MD IP...

Hi ! Mundus, I also want to test IP trunking between MDs (TSW sp2) using ELU 32.I have license. a) Can I use ELU 32 or it is possible with IPLU only ? b) Same command structure will be used as you mentioned ? c) Please give an idea about compression d) Any changes neeed to be made with Cisco...

Brilliant !

Hi ! everyone ! 1- Please someone define the term time slot and its funtionality. 2- How many TS are consumed by NIU2, LPU5, ELU 32, and IPLU 3- Does the TS keeps changing depending on usage of any card rgds

Hi ! what is the difference between /1 and /3. If BS 370 is supported with /3 ?

Hi! Etompau, My BS 340 label says NTM/KRCNB 302 01/1 R4B and BS 370 says NTM/KRCNB 303 01/1 R3A All this does not match with your description. The WRS shows an activity/no activity on upper green LED and I loose all 5 bars with an immediate return a kind of fluctuating signal. The...

Etompau you are adding to my knowledge. How do I find which frequency band is used.I don't find any documentation in Alex. BS 370 is powering up with same status as you mentioned. Call is also made through that BS. But within a minute first speech is gone and then call is dropped, although i...

Etompau you are adding to my knowledge. How do I find which frequency band is used.I don't find any documentation in Alex. BS 370 is powering up with same status as you mentioned. Call is also made through that BS. But within a minute first speech is gone and then call is dropped, although i...

System tsw sp 2. Can someone advice how to connect the BS 370 with 340.I tried to connect all the possibilities even with the PARI of nearest BS but no joy. ELU 31 is sitting on R9A.

hi devanam, do you have license to initiate required trunks. secondly do you have any other free location to change the card and do it all again.

NIINI:NAME1="SUPERUSER"; LOL

Gidday, I am sure you have done this.Checked if your console is in Off Duty mode.Tried to unhook and hook again. Try to replace with other Console. And you are using OPI 3214 not Dialog 4224. Cheers !

Hi ! Etompau, It does connect to strogest system and rest two options. But the problem is as soon as it is connected all DECTs in it's range are dropped, saying no signal. Also when signal comes up DECT can be connected to any line. Subsequently there is loss of speech and after some time line...

Gidday all Please give me an idea to huck up BS 370 with (TSWsp2). My 340 sitting: 001-0-40 ELU31 ROF1375412/1 R2C R9A EXE I tried all the possibility on BSM. It comes up but drops the speech first and then call after...

Good day Daddy, Thanks for your input to the problem it has added to my knowledge. I was a bit scared to go for SACOP as per your warning. Reason my guy misplaced the flash with latest dump. So I decided to RFEXI the system snd it is dumping Now. Cheers !

Good copy roger ! Tomorrow, will give the feedback Cheers !

Daddy please comment on this from Alex A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS...

Daddy please comment on this from Alex A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS...

Daddy please comment on this from Alex A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS...