System Dump Information REM busy

[new2md]

Good day,
TSWsp02, 3 LIM system.Can not dump last two days. Can not RFPUI any unit says Restart/reloading.RFBOI 1-0-60 did not help.

 

[whosrdaddy]

please give result of this command:

sacop:unit=rem2,lim=1,sector=ds,addr=1b0;


-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[new2md]

I thought everyone is on weekend
<sacop:unit=rem2,lim=1,sector=ds,addr=1b0; MEMORY CONTENT ON ADDRESS POSITION
EXE A

ADDRESS 0 1 2 3 4 5 6 7 8 9 A B C D E F ISO
000001B0 00 00 02 00 01 00 03 00 00 00 00 00 00 00 FF FF ................
END

 

[whosrdaddy]

Ok,

now do this:

*WARNING* this is a dangerous command and I take no responsability if this crashes your PBX

sacos:unit=rem2,lim=1,sector=ds,addr=1b2,data=0;

verify with

sacop:unit=rem2,lim=1,sector=ds,addr=1b0;

it should read

[tt]
ADDRESS 0 1 2 3 4 5 6 7 8 9 A B C D E F ISO
000001B0 00 00 00 00 01 00 03 00 00 00 00 00 00 00 FF FF ................

[/tt]

if this is okay, try to dump

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[new2md]

Daddy please comment on this from Alex
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.

If not PCASI then I will do SACOS tomorrow (weekend) with a backup HD in hand.

 

[new2md]

Daddy please comment on this from Alex
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.

Any idea with PCASI, If not then I will do SACOS tomorrow (weekend) with a backup HD in hand.

 

[new2md]

Daddy please comment on this from Alex
A change of program code or RELOAD data by means of command SACOS is not recommended, instead the command PCASI should be used. The purpose is to make changes visible in the patch log. On the other hand, it is permitted to write in program units' DS data blocks.

Any idea with PCASI, If not then I will do SACOS tomorrow (weekend) with a backup Flash in hand.

 

[whosrdaddy]

you must do this with sacos since we are changing live data ,not reload data.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[new2md]

Good copy roger !
Tomorrow, will give the feedback
Cheers !

 

[new2md]

Good day Daddy,
Thanks for your input to the problem it has added to my knowledge. I was a bit scared to go for SACOP as per your warning. Reason my guy misplaced the flash with latest dump. So I decided to RFEXI the system snd it is dumping Now.

Cheers !

 

[Option43]

Hello,
We have the same issue with a BC12 system. Can you please tell me the same SACOS for me please?

Many thanks.

 

[whosrdaddy]

Hi,

do a sacop:unit=rem2,lim=1,sector=ds,addr=1b0;
and print the results here...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!