Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Can't route between networks using Cisco 2621
Ok... My apologies for the delay. Configured a software router using FreeSCO 0.3.3. Discovered 192.168.0.254 had to be the gateway set on the Cisco Pix for the 192.168.12.0 network and set as a route on all routing tables on the 192.168.0.0 network. This allowed communications between the... -
Can't route between networks using Cisco 2621
INSIDERT#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E... -
A desperate New Guy....router config problems. HELP!!
You need both -- one for UDP and one for TCP. Give that a try and let me know! brt1991 -
how do i disable router function on ADSL modem
What make and model is your ADSL modem? -
A desperate New Guy....router config problems. HELP!!
The one thing that isn't clear, which may be your problem is which protocol? UDP or TCP? You said port 4899, however you need to specify in your Westell configuration if it is UDP or TCP. 4899 should be your base port. I checked for you: You need both assigned. So on your Westell Router you... -
Can't route between networks using Cisco 2621
ping <ip> source <interface> does not work. Doesn't like the word "source." I tried to ping from 192.168.12.99 to 192.168.0.115 and still no luck. I am concerned about the feature set possibly interfering with my desired outcome. One side sees one interface and the other only sees one. One... -
Can't route between networks using Cisco 2621
Still can't ping 192.168.12.1 Do I need to define access lists? Active Routes: Network Address Netmask Gateway Address Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.115 1 127.0.0.0 255.0.0.0 127.0.0.1... -
Can't route between networks using Cisco 2621
115 instead of 99 Active Routes: Network Address Netmask Gateway Address Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.115 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.0.0... -
Can't route between networks using Cisco 2621
Anyone know why the host 192.168.12.99 could ping 192.168.12.1 and 192.168.0.254 but 192.168.0.99 can ping 192.168.0.254 but not 192.168.12.1? brt1991 -
Can't route between networks using Cisco 2621
Unfortunately... I changed it before I replied from 192.168.12.1 to 192.168.0.254 I'll change it back.... But I am still stuck. brt1991 -
Can't route between networks using Cisco 2621
They have a route of 192.168.12.0 255.255.255.0 192.168.0.254 metric 1 I also thought RIP would assist with this.... brt1991 -
Can't route between networks using Cisco 2621
Goal: add a Cisco 2621 to an existing network (192.168.0.0) in order to add another routable network (192.168.12.0). Both networks should be able to route all packets between each other with exception of broadcasts (i.e. netbios). I configured the router but I am having no luck. I can ping...
